Although it is a car, it is still referenced. The importance of motor oil to the automobile needless to say the owner is also very much aware of, the engine oil is divided into synthetic motor oil (full synthesis and semi-synthetic), mineral oil and "fake engine oil", the owner often only knows to give the car maintenance and replacement of oil for a certain period of time. However, I don’t know if the oil that I added had an impact on the car. Is it to extend the life of the vehicle or shorten its life? In fact, the extension and shortening of life have a lot to do with the oil. Compare how different oils affect the engine. Long-term use of fully synthetic engine interior Severe carbon deposits (including long-term non-maintenance) caused by the use of "false oil" Long-term use of mineral oil inside the engine It is not difficult to see from the above three diagrams that the synthetic oil has little effect on the interior of the engine, and the internal performance is also clean. The performance of mineral oil is much poorer than that of carbon deposition. Not to mention the “false oilâ€. Synthetic motor oils perform well. To be regarded as a "high performance," a lubricant needs to measure its performance in at least four aspects: wear resistance, cleanliness, low temperature fluidity, and high temperature stability. Lubricants that perform better on these indicators can be considered to meet the criteria of the theme "high performance lubricants." Due to the limited scope of application of mineral oil, it will inevitably be eliminated by the market. The fake oil was mentioned earlier. Many people wondered how the fake oil came from. In fact, there are some recycled oils that are processed and then sold for sale. Some of them are pure base oil blending, and do not add any additives. Some are low-grade oil-filled high-grade oils to deceive consumers. What is the danger of false oil in the end? Here to briefly talk about the first, poor lubrication, increased wear and increased fuel consumption. Second, poor heat dissipation, serious carbon deposition, and reduced engine life. Finally, the increase in emissions, accelerated oil consumption, severe engine corrosion, increased engine wear, etc., and followed by a series of sequelae, so owners must clean their eyes, buy oil must also go to the regular store to buy Prevent cheating! In the end, it is inevitable that people are still tangling about when to change the oil. Xiaobian recommends that you replace it according to the following standards: Mineral oil: 5000 km or 6 months replacement Semi-synthetic: 7500 km or 6 months replacement Total synthesis: 10,000 km or 6 months replacement Note: The first comer prevails; turbine engines must use synthetic motor oil.
1, FY-16A Flat Face Mask Machine
Introduction:
Semi automatic flat mask production line adopts advanced design, only need to put the raw material on the feeding rack, after the completion of the modulating, the machine can realize automatic production. It only need one person to operate and fully realize the whole process of automatic production. The equipment also adopts ultrasonic welding, which is beautiful, sanitary, environmental friendly.The output is 150-200 pcs/min. The length of nose bridge bar can be adjusted. The product size error is ±1mm.
face mask, face mask machine, flat face mask machine, face mask making machine DongGuan FeiYang Packaging Machinery Equipment Co., Ltd , https://www.feiyang-machinery.com
