Car safety three tricks in summer In summer, due to the high temperature, the owner may encounter some problems during the use of the car. People are afraid of "heat stroke", the car is afraid of "heat stroke", and the "summer" of the car becomes a topic of common concern to the owners. In an interview, the reporter learned that under the “high temperature”, many car owners have fallen into the wrong zone during driving, such as prolonged use of air conditioners, excessive water temperatures, and so on.

The reporter interviewed Peng Jihong, the head of the maintenance station of Yibin Ruixing Automobile Sales and Service Co., Ltd., on how to “suppress the heat of the summer” in the summer. He told the city’s urban readers that the hot summer season was also a “difficult” season for the car owners. We must pay attention to the details of some car maintenance so that cars can get through the hot weather better.

Sun protection

Give the car a piece of "crystal protective clothing"

“Sun exposure has great damage to car paint. For car owners caring for their car 'face', they must always wash the car and wax regularly.” Peng Jihong said that if you want to do more thorough protection work, it is recommended Make a lacquer enamel or coating and put on a layer of “crystal protective clothing” for the car paint.

At the same time, if the owner loves to drive the window, dust can easily blow into the car. After a period of time, the car will become sticky and dirty, and even smell will appear. The plastic parts such as dashboards and door trims should be brushed. Clean it with cleaners.

Cooling

Avoid long time idle air conditioning Many cars in the summer have exposure to the sun, even if sometimes can be stopped in some sun can not escape, it is difficult to escape the hot air baking, this time open the door into the car It feels like the car is still hotter than the car. Peng Jihong told reporters in the city of Huaxi that many people usually start the car immediately, turn on the air conditioner, and increase the wind speed to achieve the fastest cooling effect. In fact, this is unreasonable.

Peng Jihong said that the right way to dissipate heat is to put down the glass on both sides of the car after starting the car, first to allow the air outside the car to convect. This will not only reduce the interior temperature quickly, but also effectively reduce the amount of air conditioning during subsequent cooling. load. After three minutes, the engine speed is stable, then the windows are retracted and the air conditioner is turned on, so that no damage is caused to the engine.

In the use of automotive air conditioners, it is advisable not to idle air conditioners for a long time. Using a car air conditioner for a long time in an idle state will have a bad influence on the engine's heat dissipation system, battery system, and the entire air conditioning system. At this time, if it can be determined that the waiting time for parking is very long, it is best to turn off the air conditioner, put down the window or leave the car after flameout. This will not only save fuel consumption, but also prolong the service life of the car air conditioner.

Cooling

When the water temperature exceeds the standard, it is necessary to stop in time. Driving in summer is not only difficult for the driver to suffer from roasting, but also the vehicle will be unable to tolerate high temperatures. The more common one is excessive water temperature. Summer car owners often pay attention to checking the water temperature table to see if the water tank is short of water.

When driving, if you find that the pointer of the water temperature gauge is approaching the red line, you should reduce the speed as quickly as possible, and stop the car in a cool place. To avoid damage to the engine, do not turn off the engine immediately after parking. Instead, let the engine idle for a while. If the water temperature does not drop down, the vehicle should be turned off and the coolant in the engine checked. But be careful not to open the tank lid immediately, otherwise it will be easily burned by steam. If it is because of insufficient coolant, make up for it first. If there is a phenomenon that the water temperature is too high, do not allow the car to travel long distances because it will cause great damage to the engine when the water temperature is abnormally running for a long time. Do not slow down, especially if you do not choose a congested road. West China City Reader Yang Yulin Cars “Sun” Artifact Shade Nets The types of shade nets are relatively simple and there are not too many choices. The price is cheaper and easy to use. It can be directly sucked on the car window with a suction cup and stored easily.

Pull-out sunshade This type of sunshade is shaped like a reel. When used, a suction cup is used to fasten it to the top of the window, and the other end can be pulled to the bottom of the window. When not in use, it can be quickly rolled up. However, there are many disadvantages of this kind of product on the market. The workmanship is rough and not durable enough.

Car sunscreen treasure in addition to support umbrellas, long sleeves, but also to wear a hat before it is absolutely foolproof! The role of sun protection treasure is equivalent to an awning. It is a sun protection appliance that is one grade higher than sun protection clothing. Its main function is to reduce heat and heat, and it also has anti-theft function to reduce the worry of owners worrying about stolen sun gear.

Side window electrostatic solar paste side window electrostatic glue solar paste in addition to the thickness of work on the points, basically no difference. This kind of static electricity paste does not need glue, only sticks to the window on static electricity, and can use repeatedly. Just stick the electrostatic sticker from the top to the bottom of the car window, and then peel off the protective cellophane on the other side. It can be cleaned and flattened when not in use, but care should be taken not to fold it.

Aluminum foil shade block aluminum foil shade, can reflect ultraviolet rays, divided into two kinds of bubbles and stripes, the latter effect is slightly better, the overall price ranging from 8 yuan to 35 yuan. This shade can be deployed and sucked into the front or rear window with a suction cup. In general, the color pattern is placed outwards. This is mainly for the sake of beauty. In a very hot season, it is best to move the aluminum foil outward to reflect the sunlight better. Can be folded up when not in use and will not take up too much space.

EVA Foam Printer

EVA Foam printer are widely used to print a lot of materials including acrylic, metal, wood, glass, plastic, phone covers, MDF, melamine board, foam boards, PVC boards, ceramic tiles, etc. Mirror effect, 3d effect, embossing effect and flat effect can be easily achieved.


With Fast & easy is a big advantage for digital uv printing. And another advantage makes digital uv printing popular in many fields is the printing durability.


UV Printer is a new technology, you can print custom designs which can increase added value of your crystal with competitive ability. And the colorful designs on the crystals are high fastness, excellent adhesion and waterproof. Thanks to Digital LED UV Flatbed Printers, promotional gifts such as awards, trophies, plaques, medal have personality with good reducibility and high quality.

eva foam printer
Name
Eva foam printer
Print head
DX5
Printer size
33*43cm(33*60cm)
Printing speed
A4 photo/111s
Printng resolution
5760*1440dpi
Nozzles
90*6=540
Interface
USB2.0
Net weight/Gross weight
55Kg/60Kg
Printer size
750*630*510mm
Height adjustment
Automatic
Working power
110V/220V 50/60Hz 30-75W
Operation system
Windows 7/XP/2000/Vista etc
Temperature
5-35o



EVA Foam Printer,A3 EVA Foam Printer,EVA Foam Printing Machine,EVA Foam UV Printer,Digital EVA Foam Printer

Shenzhen Refinecolor Technology Co., LTD. , https://www.szuvflatbedprinter.com