Steel Adhesive Wheel Balance Weights F160

Find HOPSON TYRE REPAIR® @ Essen 2016 in Germany during May.24-27, 2016.

Booth Number.: 11H26

 

We are now looking for worldwide agents for HOPSON TYRE REPAIR. If you are interested, please contact us today.

 

General Info:

 

Part No.: F160

Height:3.0mm(include tape 4.0mm)

Width:19mm

Length:138mm

Packing: 100strips/box, 4box/ctn  or  50strips/box, 8boxes/ctn

                  

Description:

 

HOPSON POWER WEIGHT offers a complete range of quality coated, non-coated and adhesive Wheel Weights for passenger cars, motorcycles and trucks. HOPSON Coated Wheel Weights are polyester coated(silver-grey) to prevent material staining on the alloy wheel. HOPSON adhesive wheel weights are pre-cut and require no additional cutting. A simplified organizational system makes wheel weight selection and application easy. Our goal is to become a partner, not just a product supplier. HOPSON POWER WEIGHT guarantee that its products will meet and exceed the highest quality standards in the industry. We are committed to ensuring your success.

 

F160 is 60grams steel adhesive weight, madeup of 4x5 grams and 4x10 grams segments.

 

Surface: Zinc plated and Epoxy coated is avaliable.

Installation of Adhesive Weights:

 

Pre-treating the rim:

Clean the rim thoroughly with a cleaning agent that is compatible with varnish(e.g. IPA 70%) in order to remove any residual grease, silicone or adhesive.

Please note: A minimum of 15ºC is required in terms of both the room temperature and the rim temperature.

 

Pre-bending the weights:

Separate the correct gram(as calculated) from the bar. Mould the shape of the weight to match the rim radius(with protective film).

Please note: You need to bend the weights gradually, otherwise they will break apart at the joins. You should bend the weight to a little more than the rim's radius.

 

Removal of the protective film:

Remove the protective film.

Please note: Do not touch the glued surface after peeling off the rim.

 

Sticking the weight on:

Attached the weight to the calculated point on the rim, making sure that the weight is distributed evenly either side and the weight is parallel with the edge of the rim.

Please note: Press down on the weight hard, working from the centre to the left and right. A minimum pressure of 1kg/cm2 is required. The angle of the sticking surface should not be higher than 15 ºC to normal.

 

 

Find HOPSON TYRE REPAIR® @ Essen 2016 in Germany during May.24-27, 2016.

Booth Number.: 11H26

 

We are now looking for worldwide agents for HOPSON TYRE REPAIR. If you are interested, please contact us today.

 

General Info:

 

Part No.: F160

Height:3.0mm(include tape 4.0mm)

Width:19mm

Length:138mm

Packing: 100strips/box, 4box/ctn  or  50strips/box, 8boxes/ctn

                  

Description:

 

HOPSON POWER WEIGHT offers a complete range of quality coated, non-coated and adhesive Wheel Weights for passenger cars, motorcycles and trucks. HOPSON Coated Wheel Weights are polyester coated(silver-grey) to prevent material staining on the alloy wheel. HOPSON adhesive wheel weights are pre-cut and require no additional cutting. A simplified organizational system makes wheel weight selection and application easy. Our goal is to become a partner, not just a product supplier. HOPSON POWER WEIGHT guarantee that its products will meet and exceed the highest quality standards in the industry. We are committed to ensuring your success.

 

F160 is 60grams steel adhesive weight, madeup of 4x5 grams and 4x10 grams segments.

 

Surface: Zinc plated and Epoxy coated is avaliable.

Installation of Adhesive Weights:

 

Pre-treating the rim:

Clean the rim thoroughly with a cleaning agent that is compatible with varnish(e.g. IPA 70%) in order to remove any residual grease, silicone or adhesive.

Please note: A minimum of 15ºC is required in terms of both the room temperature and the rim temperature.

 

Pre-bending the weights:

Separate the correct gram(as calculated) from the bar. Mould the shape of the weight to match the rim radius(with protective film).

Please note: You need to bend the weights gradually, otherwise they will break apart at the joins. You should bend the weight to a little more than the rim's radius.

 

Removal of the protective film:

Remove the protective film.

Please note: Do not touch the glued surface after peeling off the rim.

 

Sticking the weight on:

Attached the weight to the calculated point on the rim, making sure that the weight is distributed evenly either side and the weight is parallel with the edge of the rim.

Please note: Press down on the weight hard, working from the centre to the left and right. A minimum pressure of 1kg/cm2 is required. The angle of the sticking surface should not be higher than 15 ºC to normal.

 

 

Comb idler is made by plain roller with welded spiral steel. It's used for cleaning conveyor belt. comb idler is setting in the position where unwanted debris will stick to the belt seriously. It removes the sticky material to keep belt clean and running stable, avoid misalignment. Usually, it's used in conjunction with sleeve rollers at the beginning of return run. comb idler roller diameter is fromφ76 to φ219

Comb Idler used in acid and alkali resistant industry of conveyor, comb idlers can replace the metal roller , nylon roller , long life , easy installation , custom center smooth transportation , reduce conveyor belt deviation and protection conveyor belts and other characteristics . comb roller superior performance than traditional iron roller , low wear coefficient , the proportion of small , light weight , easy to replace , and the low noise , smooth operation , more suitable for the working environment of the production conditions , high service life.

Comb idler usually use big clearance deep groove ball Bearing For Conveyor Idler roller.

To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.

Comb Idler

Comb Type Cleaning Roller,Comb Cleaning Roller,Comb Idler

Shandong Xinkaite Bearing Co., Ltd. , http://www.conveyorbearing.com