Brief description of the main features of the disk coal analyzer

Briefly describe the main features of the disk coal analyzer:

1. Accuracy of disc coal analyzer: No disc coal dead angle, relative error <0.5%; High degree of automation: Most of the measurement data is automatically collected by the scanner, labor intensity is low;

2. The speed of burning coal is fast: A coal mine can be scanned and measured within half an hour. Calculated at the scene, all the results of the disk coal can be obtained within one minute;

3. Less auxiliary equipment, basically zero maintenance; Easy to operate: Chinese prompts and instructions for each step of operation, easy to learn and teach;

4. Use flexibility: It can calculate the coal storage in any specified range within the coal yard; function diversification: a variety of graphs are generated during program operation. It is possible to view the height and plane coordinates of any point on the coal pile and plot coal seam profiles in either direction;

5. Wide range of applications: For coal yards equipped with scanners, coal can be burned when the stacker-reclaimer cannot operate, and coal can be used for coal yards where scanners cannot be installed.

The utility model has the advantages of convenient use, measurement accuracy can reach more than 99%, and is suitable for ordinary stockpile inventory work. In the manual measurement, this laser inventory meter can also provide information such as length, height, width, etc., eliminating the tedious tasks such as pulling a ruler, is a good helper for your work.

The coal analyzer uses a laser scanner to automatically scan the coal yard. For the scanning dead zone in the coal yard, a portable laser measuring instrument is used for manual scanning measurement. The computer processed the data obtained by the two instruments. The digital model was used to establish a digital model of the coal field surface. The coal volume was calculated according to the volume integral principle, and the three-dimensional map of the coal field was plotted according to the digital model. The calculated volume is then multiplied by the proportion of coal as the coal storage capacity in the coal yard.