We make steel coil slitting machines, the steel coils can be low carbon steel, middle or high carbon steel,stainless steel, alloy steel, the state of steel coils can be HR, CR, galvanized(GI,GL), colored(PPGI,PPGL).
Our steel coil slitting lines apply to different applications of steel coil processing industries to make all kinds of steel product, such as profiles rolling machines, cold rolling mills, ERW welded tube mills, Construction, appliances, Communications,etc. With rich experiences, we are able to design and make each slitting machine customerized to each customer's usage of slit strips, moreover, provide sustainable after-sale support. We engage in our promise of satisfying customers with good steel coil slitting machine product and services.
Steel Coil Slitting Machine,Steel Sheet Slitting Line,Steel Sheet Slitting Machine,Stainless Steel Slitting Line Wuxi Jinye Complete Set of Equipment Co.Ltd. , https://www.machinejinye.com
SK-2FB explosion-proof vibration speed sensor is mainly used for mechanical vibration measurement, it is the use of magnetic induction principle to convert the vibration speed into voltage output. The rolling support of the rotor, the vibration will be transmitted to the bearing housing large enough, mounted on the seat or very close to the sensor on the housing, the internal motion coil cuts the magnetic field and the output voltage, providing a signal to the detection instrument, used to machinery Fault prediction and alarm.
Function Description:
In the design of explosion-proof vibration velocity sensors, full consideration was given to the purpose of exploding explosives when the explosive mixture intrudes into its interior and explodes for some reason, from the strength of the shell and the gap between the components that make up the shell. , Length, and other critical conditions that limit the maximum surface temperature of the enclosure, to ensure flameproof performance.
The external grounding of the explosion-proof vibration velocity sensor is an important measure to ensure its safe operation. The sensor and the object to be measured are firmly connected through the stainless steel mounting screws and reliably grounded.
Technical Parameters:
1. Explosion-proof mark: Exd II CT6
2, protection class: IP54
3, sensitivity: 20-50mv/mm/s
4, frequency response: 10-300Hz
5, measuring range: 2mm
6, acceleration: 8g
7, the measurement direction: vertical or horizontal
8, the use of the environment: temperature -10 °C -100 °C
9. Relative humidity ≤90%
10, fixed screw hole: M10 * 10 * 1.5 (deep)
11. Overall size: φ32*68mm
12, weight: about 250g
Overview: