In January, 340,000 domestic vehicles were recalled, and nearly half of Mitsubishi recalled

Recently, according to the recall announcement issued by the AQSIQ official website, Gasgoo sorted out the domestic automobile recalls in January 2018. The results showed that in January this year, there were 15 announcements concerning vehicle recalls involving 13 auto companies. 26 A total of 343,823 vehicles were recalled. In the second half of last year, Takada’s airbag incident that led to the domestic wave of large-scale recalls reappeared this month. There were five recall incidents involving the Takadan-made airbag directly resulting from the “damage of the gas generator casing and causing debris to fly out” and the vehicle was recalled. 36,667 vehicles, accounting for 10.66% of the total recall.

In addition to airbags, there were two recalls due to engine problems, involving Mitsubishi Motors and South East Motors, a total of 53,653 vehicles. Fuel tanks were found at BMW Brilliance 316i, 316 Li, 320i, 320Li, 328i, 328Li, and 335Li. Cracking of the upper cover caused fuel leakage when the vehicle was full of fuel. The number of recalls was 16,504.

Mitsubishi Motors became the most recalled brand in January with 2 batches of 143,507 recalls, accounting for 41.7% of the total recalls. Among them, due to the lack of waterproof jacket of the brake caliper shaft portion resulting in reduced parking brake force, the engine drive belt problem caused by the loss of the drive belt caused the failure of steering assistance accounted for most of the recall, involving the Outlander EX Jinjie (import) , ASX Jin Hyun (import), Lancer EX (import) and other models.

As for the specific situation, Gasgoo Automobile has conducted comprehensive statistics according to the recall data of AQSIQ, which is organized as follows:

The domestic car recalls in January were as follows:

Southeast Asian Automobiles recalled 6,477 Mitsubishi Wingsong due to engine transmission problems

Recall range:

From April 27, 2018, the recalled parts of the southeastern Mitsubishi winged 2.0L passenger car for the 2010-2012 period from July 10, 2009 to August 30, 2013 totaled 6,477 units.

Recall reason :

In the area of ​​recall, the engine transmission belt automatic tensioner mounting seats of some vehicles may be damaged due to the shape and cause the transmission belt to fall off, resulting in failure of steering assistance. Continuing driving can result in battery exhaustion, engine overheating, and other safety hazards.

Solution :

Southeast (Fujian) Automobile Industry Co., Ltd. will replace the qualified engine belt automatic tensioner for the vehicles in the recall scope to eliminate potential safety hazards. Southeast (Fujian) Automobile Industry Co., Ltd. will notify the owner by registered letter, etc. Authorized service outlets will also take the initiative to contact the relevant owners to arrange the recall. Users can dial the Southeastern (Fujian) Automobile Industry Co., Ltd. service hotline 400-661-1666 (mobile phone, landline) for consultation, or visit the Southeast (Fujian) Automotive Industry Co., Ltd. website () for more information.

Dongfeng Honda has recalled 100 airbags

Recall range :

From March 1, 2018, some of the imported 2013 Styxets were recalled from April 26, 2012 to June 29, 2012. According to statistics of the company, there are a total of 100 vehicles in mainland China.

Recall reason :

The airbags for the front passengers of some vehicles within the scope of this recall have installed a non-desiccant ammonium nitrate gas generator produced by Takata Corporation. When the airbag is deployed, the gas generator of the airbag may be damaged abnormally, causing the debris to fly out and injuring the people in the vehicle, presenting a safety hazard.

Solution :

Dongfeng Honda Automobile Co., Ltd. will replace the front passenger front airbag gas generator for free in the recalled area to eliminate defects. Related users should drive carefully to avoid collisions. The user should contact the dealer as soon as possible after the recall action begins.

Dongfeng Honda Motor Co., Ltd. will notify customers by registered letter, etc. Dongfeng Honda Automobile Co., Ltd. special sales service shop will notify the owner of the target vehicle by SMS, telephone, etc. Users can call the Dongfeng Honda Automobile Co., Ltd. Hotline 800-880-9899 (fixed lines), 400-880-6622 (mobile phones, fixed lines) to obtain relevant information on this recall.

Mercedes-Benz recalls 2,151 GLE SUVs and GLS SUVs for noise insulation and bolting problems

Recall range:

From February 2, 2018, some of the imported GLE SUV and GLS SUV series vehicles for 2015-2017 produced from May 13, 2015 to June 10, 2016 were recalled. According to the statistics of the company, 2,151 vehicles were involved in the Chinese mainland. details as follows:

(i) A part of the imported GLE SUV and GLS SUV series cars, which were produced during the period from May 4, 2016 to June 10, 2016, totaled 2,131 vehicles;

(2) A part of imported GLE SUV series vehicles for 2015-2016 produced during the period from May 13, 2015 to July 6, 2015, a total of 20 vehicles.

Recall reason:

In the above-mentioned range (1), the inner part of the vehicle does not meet the requirements due to the manufacture of the soundproof cotton in the lower part of the instrument panel. The soundproof cotton may appear in the lower area of ​​the front windshield and block the VIN code. In addition, the extra soundproofing cotton may affect the adhesion of the front windshield glass. If there is a collision with the front passenger airbag of the deployed passenger, the front windshield may not be able to support the airbag, increasing the risk of injury to the front passengers and causing potential safety hazards.

Due to the deviation of the relative position between the nut and the end plate during the welding of the partial vehicle in the above range (2), the bolt connection at the end of the rear right seat belt may not be firm. When the vehicle is collided with a safe and high load, the failed bolt connection may fail, increasing the risk of injury to the right passenger in the rear row and causing potential safety hazards.

solution:

For the above scope (1) Mercedes-Benz (China) Automobile Sales Co., Ltd. will inspect and remove the excess noise insulation cotton for the vehicles within the recall scope, if the impact of the front windshield has been affected, then repair the front windshield, To eliminate defects.

For the above range (2) Mercedes-Benz (China) Automobile Sales Co., Ltd. will check the bolted state of the rear right seat belt at the vehicle within the recall range, and if necessary repair it to eliminate defects.

Mercedes-Benz (China) Automobile Sales Co., Ltd. will notify customers by registered letter. Users can call the Mercedes-Benz (China) Automobile Sales Co., Ltd. hotline 400-818-1188 to obtain relevant information on this recall.

Hidden Troubles in Airbags Dongfeng Honda Recalls Allen & Black Platinum, 25,483

Recall range:

Since March 1st, 2018, some of Elliott and Platinum Rui Automobile have been recalled, totaling 25,483 vehicles, as follows:

(i) A total of 15,748 ELYSION 2013 vehicles were produced during the period from April 19, 2012 to August 26, 2013;

(b) 2013 SPIRIOR 2013 vehicles, a total of 9,735 vehicles were produced during the period from May 16, 2012 to October 23, 2013.

Recall reason:

The passenger side front airbag of the vehicle within the scope of this recall is equipped with a Takahara Corporation's ammonium nitrate gas generator without desiccant. When the airbag is deployed, the gas generator of the airbag may be damaged abnormally, causing the debris to fly out and injuring the people in the vehicle, presenting a safety hazard.

solution:

Dongfeng Honda Automobile Co., Ltd. will replace the passenger-side front airbag gas generator for the vehicles within the recall area free of charge to eliminate potential safety hazards. Dongfeng Honda Automobile Co., Ltd. will send a “Defective Automobile Product Recall Notice” to the owner of the target area through a registered letter. The Dongfeng Honda Automobile Co., Ltd. special sales service store will inform the owner of the target area by SMS, telephone, etc. Users can call Dongfeng Honda Motor Co., Ltd. customer service hotline 800-880-9899 (fixed), 400-880-6622 (mobile phone, fixed-line) for consultation.

Hyundai recalled 63,852 new Tucson vehicles due to control harness hidden dangers

Recall range:

From February 1, 2018, a total of 63,852 new Tucson vehicles were recalled for production from April 1, 2017 to October 25, 2017.

Recall reason:

Due to assembly problems in the vehicle within the scope of this recall, the parking brake pedal arm may interfere with the control wiring harness after the parking brake pedal is depressed in the parking state. After a certain period of use, the control wiring harness may be worn, causing the dashboard fault light to light up and the vehicle to fail to start. In extreme cases, the control wiring harness may be short-circuited, causing potential safety hazards.

solution:

Beijing Hyundai Motor Co., Ltd. will provide free inspection and maintenance for vehicles in the recalled area. If the control harness has worn out, the control harness is replaced for free to eliminate potential safety hazards. Beijing Hyundai Motor Co., Ltd. will notify the relevant owners through registered dealers by registered mail. Users can call customer service hotline 400-800-1100 for consultation.

Dual-clutch Transmission Problem Beijing Hyundai Expands Recall of 33,722 New Tucson

Recall range:

From February 1, 2018, a total of 33,722 new Tucson vehicles equipped with a seven-speed dual-clutch transmission will be recalled between June 1, 2016 and August 23, 2016.

Recall reason:

Vehicles within this recall range may experience delays due to the presence of a TCU program. If you continue to steadily step on the accelerator pedal for 1.5-2.0 seconds, the vehicle will start to accelerate and the vehicle will return to normal. However, if you repeatedly depress the accelerator pedal, the vehicle may not be able to accelerate and there is a potential safety hazard.

solution:

The recall is an extended recall of the recall of some new Tucson vehicles recalled by Beijing Hyundai Motor Co., Ltd., which was released on September 30, 2016. Due to product traceability, Beijing Hyundai Motor Co., Ltd. decided to expand the recall scope. Beijing Hyundai Motor Co., Ltd. will notify the relevant owners through registered dealers by registered mail. Users can call customer service hotline 400-800-1100 for consultation.

Electric Power Steering Device Hidden Geely Recalls 40,068 Berry GC-9s

Recall range:

Since January 26, 2018, some of the Borui GC-9 vehicles produced during the period from April 1, 2015 to October 28, 2016 have been recalled for a total of 40,068 vehicles.

Recall reason:

Vehicles within the scope of this recall may suffer from persistent corrosion problems in the connector pins of the electric power steering gear harness, which may cause the electric power steering assistance system to report fault codes after a long period of use. In extreme cases, it may lead to the failure of the vehicle's electronic steering assistance and there are potential security risks.

solution:

Zhejiang Geely Automobile Co., Ltd. will install rubber mats between the electric power steering gear housing and the motor involving the vehicles free of charge and apply grease on the harness terminal to eliminate potential safety hazards. Zhejiang Geely Automobile Co., Ltd. will entrust Geely Automobile's special service station to notify relevant owners through registered letters, telephone calls, short messages, etc., asking the relevant owners to go to the nearby Geely Automobile special service station for free overhaul. Users can call the customer service hotline 400-886-9888 to get information about this recall through the landline or mobile phone.

Rear brake caliper problem Mitsubishi recalls 51,596 Outlanders

Recall range:

From April 27th, 2018, recalled some of the imported 2013-2016 Outlander vehicles produced during the period from November 15, 2012 to January 28, 2016. According to the statistics of the company, 51,596 vehicles were involved in mainland China.

Recall reason:

Due to insufficient waterproof performance of the jacket of the rear brake caliper shaft, some vehicles in the recalled area will cause the central shaft of the parking brake to rust after the water intrudes. Corrosion between the shaft and the body results in jamming, resulting in a decrease in the parking brake force. The vehicle in the parking state may slide, causing potential safety hazards.

solution:

Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of recall. If the parts before the improvement are installed, it is necessary to confirm the rust of the shaft and dispose as follows: If the shaft is stuck or the shaft When the corrosion has developed into the caliper, the rear brake caliper is replaced with an improved component; if the shaft rust does not develop inside the caliper, the sheath assembly is replaced with an improved product after derusting to eliminate defect.

Mitsubishi Motors Sales (China) Co., Ltd. will notify customers by registered letter. Users can access the recalled information by logging onto the Mitsubishi Motors Sales (China) Co., Ltd. website or calling the Mitsubishi Motors Sales (China) Co., Ltd. hotline 4009773030 (both fixed and mobile).

Due to the latch problem Ford recalled F-150 Raptor 363

Recall range:

From February 28, 2018, it recalled some imported 2015-2017 F-150 Raptor vehicles from March 12, 2014 to December 31, 2016. According to statistics of the company, 363 vehicles were involved in the mainland of China.

Recall reason:

Due to manufacturing reasons, due to manufacturing reasons, some of the vehicles in the recalled area may have water seepage in the door bolt cover. Under low temperature conditions, the side door latch will freeze, which may cause the locking mechanism to get stuck after the door is opened. In addition, due to improper installation of some vehicles, the door puller cable may be twisted, which may also cause the retainer to become stuck. In some cases, the above-mentioned causes the jamming of the bolt. Under the action of the friction between the latches and the resistance of the door sealing strip, the door cannot be properly locked and there is a safety hazard.

solution:

Ford Motor (China) Co., Ltd. will install waterproof shields and check the bolts for the vehicle door latches in the recall range, and perform corresponding repairs according to the inspection results to eliminate defects. Inventory vehicles will be sold after defects are eliminated.

If the relevant user finds it difficult to open the door or it is difficult to lock the door when the door is closed or if the door bounces when trying to close the door several times, or if multiple attempts are required to lock the door, contact an authorized dealer for the vehicle. Related inspections. The user should contact the dealer as soon as possible after the recall action begins.

Ford Motor (China) Co., Ltd. will notify customers by registered letter. Users can call Ford Motor (China) Co., Ltd. hotline 800-810-0740 to obtain relevant information of this recall.

Parking brake, engine and sunroof hidden dangers Mitsubishi recalls Outlander, Lande EX Jinjie, ASX Jinxun and Lancer EX81, 911 units

Recall range:

Since April 27, 2018, the following cars have been recalled. According to the statistics of the company, 81,911 vehicles were involved in mainland China.

(i) Of the imported 2014 Outlander vehicles of the 2014 model series, a total of 8,596 vehicles were produced during the period from July 8, 2014 to December 17, 2014.

(II) Some of the imported 2008-2012 Outlander EX models in the 2008-2012 period, which were produced during the period from June 25, 2008 to November 15, 2011, totaled 30,243 units; July 7, 2010 to November 1, 2011 During the period of production, part of the imported ASX Jin Hyun series cars for 2011-2012 amounted to 16,542 vehicles; some imported 2009 Lancer EX series cars were produced during the period from October 3, 2008 to July 21, 2009, a total of 391 vehicles. . A total of 47,176 vehicles.

(iii) Partial import of the 2007-2010 Outlander EX model series cars produced during the period from November 23, 2006 to October 12, 2009, totalling 25,748 vehicles; from October 3, 2008 to July 21, 2009 During the period of production, some 391 Lancer EX series cars were imported in 2009. Total 26,139 vehicles.

Recall reason:

In the above-mentioned range (1), the function of the part of the vehicle in the parking brake device to automatically adjust the gap between the brake shoes may be invalid due to the manufacturer's manufacturing reasons. As the wear of the brake pads continues to increase, the parking brake force will decrease. When it is serious, the vehicle in the parking state may slide and there is a safety hazard. Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles in the recall range. If the left and right rear brake calipers are parts before improvement, replace the piston in the rear brake caliper with an improved product to eliminate defects. .

In the above range (2), the engine transmission belt automatic tensioner mounting seat of some vehicles in the range may be damaged due to the shape and cause the drive belt to fall off, resulting in the failure of the steering assist. Continuing driving can result in battery exhaustion, engine overheating, and other safety hazards. Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of recall. If it is an automatic tensioner before improvement, it will be replaced free of charge to eliminate defects.

In the vehicle in the above range (3), due to the problem of material selection of the resin material of the outer frame of the sunroof, the adhesion force with the sunroof glass during use is reduced. After long-term use, the sunroof glass will be peeled from the outer frame. When it is serious, the sunroof glass may fall off during the running of the vehicle, which may cause hidden safety problems. Mitsubishi Motors Sales (China) Co., Ltd. will replace the improved sunroof glass assembly for free in the recalled area to eliminate defects.

solution:

For the above scope (1) Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles in the recall range. If the left and right rear brake calipers are parts before improvement, replace the piston in the rear brake caliper with an improved one. Products to eliminate defects.

For the above scope (II) Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of recall. If it is an automatic tensioner before improvement, it will be replaced free of charge to eliminate defects.

For the above scope (III) Mitsubishi Motors Sales (China) Co., Ltd. will replace the improved skylight glass assembly for the vehicles within the recall scope free of charge to eliminate defects.

Mitsubishi Motors Sales (China) Co., Ltd. will notify customers by registered letter. Users can call Mitsubishi Motors Sales (China) Co., Ltd. hotline 4009773030 (both fixed and mobile phones) to access the recalled information by logging onto the Mitsubishi Motors Sales (China) Co., Ltd. website.

Hidden damage to airbags Toyota recalls Lexus IS and GX series 2,125 vehicles

Recall range:

From April 30, 2018, some imported Lexus IS and GX series cars that were produced during the period from January 7, 2013 to December 25, 2013 were recalled. According to the statistics of the company, 2,125 vehicles were involved in mainland China. . details as follows:

From May 22, 2013 to November 29, 2013, some imported 2013 Lexus IS250C cars, a total of 31 vehicles;

From January 7, 2013 to December 25, 2013, some of the 2013 Lexus GX400 cars were imported, totaling 2,094 vehicles.

Recall reason:

The airbags of the co-pilots of some vehicles within the scope of this recall were equipped with an ammonium nitrate gas generator produced by Takata Corporation without desiccant. During the deployment of the airbag, the gas generator may be damaged, causing debris to fly out and injuring people in the vehicle. This poses a safety hazard.

solution:

Toyota Motor (China) Investment Co., Ltd. will replace the airbag assembly or gas generator of the passenger seat free of charge for vehicles in the recalled area to eliminate defects. Related users should drive carefully to avoid collisions. The user should contact the dealer as soon as possible after the recall action begins. Toyota Motor (China) Investment Co., Ltd. will notify customers by registered letter. Users can call the Toyota Motor (China) Investment Co., Ltd. hotline 800-810-2772 or 400-810-2772 to obtain relevant information about this recall.

Hidden damage to airbags 7 Model S was recalled

Recall range:

From January 15, 2018, a portion of the 2013 Model S series cars imported from September 24, 2013 to December 21, 2013 were recalled. According to the statistics of the company, there were 7 vehicles in the Chinese mainland.

Recall reason:

The airbags of the co-pilots of some vehicles within the scope of this recall were equipped with an ammonium nitrate gas generator produced by Takata Corporation without desiccant. During the deployment of the airbag, the gas generator may be damaged, causing debris to fly out and injuring people in the vehicle. This poses a safety hazard.

solution:

Tuo Sule Automotive Sales (Beijing) Co., Ltd. will replace the modified airbags for free in the recalled area to eliminate defects. Related users should drive carefully to avoid collisions. The user should contact the dealer as soon as possible after the recall action begins. Tuo Sule Auto Sales (Beijing) Co., Ltd. will notify customers by registered letter. Users can dial the Speedline Auto Sales (Beijing) Co., Ltd. hotline 400-910-0707 to get relevant information of this recall through mobile phone or fixed line.

Hidden damage to airbags Jaguar Land Rover recalled Jaguar XF 8,952 vehicles

Recall range:

From January 19, 2018, some of the imported 2013 Jaguar XF series cars that were produced during the period from June 19, 2012 to October 1, 2013 were recalled. According to the statistics of the company, there were 8,952 vehicles in the Chinese mainland.

Recall reason:

Some of the cars in the recalled area were equipped with an ammonium nitrate gas generator without desiccant produced by Takata Corporation due to the front passenger airbag front airbags. When the airbag was deployed, the gas generator may be damaged, resulting in debris flying. Outgoing, injuring people in the car, there is a security risk.

solution:

Jaguar Land Rover (China) Investment Co., Ltd. will replace the modified airbags for free in the recalled area to eliminate defects. Related users should drive carefully to avoid collisions. The user should contact the dealer as soon as possible after the recall action begins. Jaguar Land Rover (China) Investment Co., Ltd. will notify customers by registered letter. Users can call the Jaguar Land Rover (China) Investment Co., Ltd. hotline 400-820-8955 for information on this recall through mobile phones or fixed lines.

Hidden damage to airbags FAW-Volkswagen, Volkswagen recalled Audi Q3 and Sharan 512

Recall range:

The following vehicles were recalled from January 31, 2018, totaling 512 vehicles.

(a) FAW-Volkswagen Automotive Co., Ltd.: A part of the domestically produced 2017 Audi Q3 cars from November 7, 2016 to December 3, 2016 totaled 467 units.

(2) Volkswagen (China) Sales Co., Ltd.: A portion of imported Sharon vehicles of 2017, which were produced between September 13, 2016 and September 28, 2016, totaled 45 vehicles.

Recall reason:

For some vehicles in this recall area, due to suppliers' manufacturing reasons, poor welding between the pressure vessel of the gas generator in the front passenger's front airbag and the igniter may cause the airbag to be under-inflated during deployment, causing occupants to inflate. The protective effect is reduced and there are safety risks.

solution:

FAW-Volkswagen Automotive Co., Ltd. and Volkswagen (China) Sales Co., Ltd. will replace the front passenger airbag module for vehicles within the recall scope free of charge to eliminate potential safety hazards. FAW-Volkswagen Automotive Co., Ltd. and Volkswagen (China) Sales Co., Ltd. will notify the user by registered letter, and the authorized dealers of the two companies will also contact relevant users to carry out maintenance. Users can also call FAW-Volkswagen Automotive Co., Ltd. hotline 400-817-1666 and Volkswagen (China) Sales Co., Ltd. hotline 400-188-0888 for detailed information on this recall.

Fuel tank leak problem BMW Brilliance recalls BMW 3 Series 16,504 vehicles

Recall range:

From April 2, 2018, some BMW Brilliance 316i, 316 Li, 320i, 320Li, 328i, 328Li, 335Li cars produced during the period from September 1, 2015 to October 31, 2015 were recalled, totaling 16,504 vehicles.

Recall reason:

Vehicles within the scope of the recall, due to fuel tank supplier manufacturing reasons, after long-term use, the processing tank cover on the top of the fuel tank may crack, resulting in fuel leakage when the vehicle is full of fuel, and there are potential safety hazards.

solution:

BMW Brilliance Automotive Co., Ltd. will replace fuel tanks within the recalled area free of charge to eliminate potential safety hazards.

As an emergency solution, users are advised not to exceed 3/4 of the fuel gauge when fuel is added, so as not to increase the load induced by the fuel tank. If the user smells a fuel odor or observes a fuel leak, he should contact a BMW authorized dealer for repairs as soon as possible.

The recall was carried out in the case of a defect inspection initiated by the General Administration of Quality Supervision, Inspection and Quarantine. For some time, the AQSIQ defective product management center has received complaints from consumers about this issue. After receiving the complaint, the General Administration of Quality Supervision, Inspection and Quarantine immediately deployed the Defective Product Management Center to conduct defect investigations and assessments on the above issues. Affected by the investigation, BMW Brilliance Automotive Co., Ltd. decided to take recall measures to eliminate potential safety hazards.

BMW Brilliance Automotive Co., Ltd. will contact the users within the scope of the recall by means of registered letter and BMW authorized dealer direct contact to arrange free maintenance. Users can call the BMW service hotline 400-800-6666 (either fixed or mobile) to learn more about this recall.