Enter Zibo Cat Wind Power Vertical Axis Wind Turbine

Zibo Carter Wind Power ( ) News:

Zibo Carter wind power vertical axis wind turbines do not need wind when the wind direction changes. At this point , it is a great advantage compared to the horizontal axis wind turbines . It not only simplifies the structural design, but also reduces the wind wheel wind Gyro force.

The vertical axis wind turbine produced by Zibo Carter Wind Generator Co., Ltd. has the following remarkable features:

I. Security: O-blade and triangular double-branch design are adopted, and the main stress points are concentrated on the hub, so problems such as blade shedding, fracture and blade flying out are well solved;

II. Noise: The use of horizontal plane rotation and blade application of the principle design of the aircraft wing, making the noise reduced to a level not measured under the natural environment;

3. Wind resistance: The principle of horizontal rotation and triangular double pivot design makes it withstand wind pressure and can withstand super typhoons of 50 meters per second;

Rotation radius : Due to its different design structure and operation principle, it has a smaller radius of gyration than other forms of wind power generation , saving space and improving efficiency;

Five power curve characteristics: Start low wind speed to other wind turbines, the power generation rise more gradual, thus in the wind speed range of 3 to 9 m, its power generation is 10% to 30% compared with other wind turbines ;

The use of wind speed range: the use of a special control principle, so that it is suitable for the operation of the wind speed range expanded to 3 ~ 25m / s, in the large-scale use of wind resources at the same time to obtain a larger total power generation, improve the use of wind power equipment Economical

Seven brake devices: Manual mechanical and electromagnetic brakes can be configured in two, in the absence of typhoon and super gusts of the region, only need to set a manual brake;

VIII. Operation and Maintenance: Direct-drive permanent magnet generators are not required, and gearboxes and steering mechanisms are not required. Periodically (usually every six months), the connection of the running parts can be checked.

Articles from: