Stainless Steel Coil Tube, is made by stainless seamless or welded tube with small diameter, from straight long tubes into a coil shape.
The coiled tube we produce can reach over 1000meters per coil,which highly reduces the tubing unions and wastage during installation and improve the working efficiency.
Stainless Coil Tube,Stainless Steel Coil Tubing,Stainless Steel Coil Pipe,Cold Drawn Stainless Steel Tube TORICH INTERNATIONAL LIMITED , https://www.steeltubepipechina.com
Coiled tubing is a long metal pipe that is surrounded or rolled over a large reel that is brought to the well site when any well repair or workover activities are to be performed.
With the introduction of ADB matrix smart headlights from the Daimler parent company Daimler Group in 2017, it is driving a new wave of application trends for the automotive electronics industry. After the production and certification of the Taiwanese LED packaging manufacturer Yiguang in the Miaoli Tonglu factory, the new ADB matrix intelligent headlight module was released for the first time. The headlight module is a combination of 24 LEDs. It is pointed out that there are already specific cooperative customers, and it is expected that the fastest contribution will be brought in between 2018 and 2019. When driving on the road, the car will encounter various conditions. Among them, the number of accidents caused by the glare of the headlights is rising. Yiguang has launched the latest ADB matrix type intelligent LED headlights, and the CCD automatically detects the oncoming vehicles. And automatically turn off the light source in the area, to avoid the danger of the driver of the incoming car being affected by the far-distance light of the incoming vehicle. ABD matrix intelligent LED headlights are made up of 24 LEDs of 2.0mm x 1.6mm size. This single LED can provide 190lm brightness at 700mA operating current. With intelligent control, the brightness can be independently adjusted. 1024 grayscale changes. In addition, Yiguang is equipped with a fisheye lens, a control module, a special row of light guide columns, and a reliable CCD detection system to flexibly adjust the light source block for more accurate identification and illumination. This product complies with the ECE R112 class B DrivingBeam regulations and is designed and developed in conjunction with major OE (original) depots. However, the matrix ADB system is currently mainly used in high-end cars, and it has not yet been popularized, but there is no doubt that LED lights are gradually becoming intelligent. As the key project for the positive development of Yiguang in 2017, the first phase of the new copper gong factory was completed in August 2016, and the second phase has also started production. The total investment is about NT$10 billion, and the main vehicle is used. Component production. According to the plan of Yiguang, the new copper ware factory will be divided into three phases. Yiguang is a Taiwanese LED packaging manufacturer headquartered in Taiwan, China. The factory is located in Tucheng, Yuanli, Tonglu, Taiwan, and Suzhou, Guangzhou and other places in mainland China. The total packaging capacity is about 4 billion, and it currently holds Thailand. It has a 9.6% stake in the Valley and holds approximately 1.8% of the shares in Jingdian. In 2016, Everlight's revenue was approximately 29.347 billion yuan (equivalent to RMB 6.638 billion), an annual increase of 1.7%, gross profit margin of 24.5%, annual increase of 1 percentage point, business profit of 2.136 billion yuan, annual increase of approximately 8.5%, net profit after tax 1.84 billion yuan, earnings per share of 4.13 yuan, is a small number of positive growth in Taiwan, in the latest LED packaging plant revenue rankings in the forefront, and plans to expand capacity to 5.5 billion in 2017. Yiguang's March 2017 revenue was better than January and February, but the first quarter was affected by the traditional off-season and exchange rate, with a year-on-year decrease of 3%. At present, the two largest products of backlight and lighting account for about 20% and 30% of the revenue. Others include vehicles, small-pitch screens, and high-margin invisible light, which together account for 50% of revenue. Due to the increasing penetration rate of small-pitch screens, demand has grown steadily this year; automotive LEDs have the capacity to add new copper gongs, and new plants will be included in revenue after auto certification. It is expected that LED LEDs will increase by 20% this year. . Invisible light also benefits the Internet of Things, and shipments continue to grow. Overall, the company believes that its 2017 operating performance should be better than 2016. Ever since its expansion in 2014, Everlight has a complete range of automotive products for indoor and outdoor applications. All products are resistant to vulcanization. They are fully tested for different corrosive gases through H2S, SO2, CL2 and NO2, which can effectively reduce the resistance of LED products. Problems such as brightness, color coordinates, voltage, and functional failure caused by the vulcanization test. In addition to the product style, Yiguang knows the high standard quality requirements of all aspects of the car factory. At the beginning of 2015, we will build a new copper ware factory. With the concept of human factors engineering, we will automate the AOI and clearly separate the warehousing and production. Undertake the moving line, and use RFID (Radio Frequency Identification) to assist the MES system for process control. The whole product is laser-coded immediately before the solid crystal, which is convenient for process and post-mortem product status, combined with floor moving line, automated AOI, MES. Advantages of the (Manufacturing Execution System) system, Yiguang Copper and Tantalum Factory is pursuing high quality while minimizing the productivity of manpower and logistics consumption. It can produce up to 200 KK per month. It is the most man-made project in Taiwan. Concept, a smart factory with both quality and productivity.