The modular design of light crane contains fewer standard Crane Parts that make crane assembly as easy as stacking blocks. With these modular parts, users can reassemble a new crane, according to the change in lifting requirements of the alterations made to the workshop. Light Crane System,Light Crane Systems,Light Cranes System EUROCRANE GLOBAL , https://www.overhead-crane.com
First, the instrument surface cleaning step 1 first with a dry cotton cloth or a clean wiping paper to wipe the surface of the instrument used to wipe the surface of the instrument oil and dust must pay attention to gently wipe to protect the instrument surface will not be injured.
2. Use a clean cotton cloth to wipe the surface of the meter, especially the metal part.
二〠Instrumentation Mirror Wipe Step 1· Wipe the mirror gently with a wiping mirror paper. Do not use force to avoid damage to the mirror.
2. Use a cotton swab to pick up the industrial alcohol, wipe the mirror, and wait until the surface of the meter has dried completely.
3ã€Mirror wiping can be divided into calibration glass lens and lens lens group. Because the dust particles can cause black spots, mirror wiping is very important. After installation, the wiping effect must be observed with the help of images.
Third, the instrument rotating part of the dry friction part of the maintenance steps 1 first with a dry cotton cloth to wipe the surface, wipe the oil dust.
2· Blowers can also be used to blow off dust.
3· If necessary, use a cotton swab to wipe the surface with industrial alcohol.
IV. Lubrication Section Maintenance Step 1 • Wipe the surface dust with a dry cotton cloth. 2. Lubricate the lubrication oil or add grease.
Due to the ultra-light weight of the crane, there is little friction between the trolley wheel and the rail. Easily moved by hands, this Suspension Crane can move clumsy, heavyweight workpiece in a fast manner. Available also with the mechanical electrical chain Hoist, hoist drive, electrical control device, and matched system, the crane requires limited maintenance and has a long service life.
This series of crane can run on both straight and curved rails. By using many other modular parts, it can be reassembled to become the single-girder or double-girder crane. Each of the modular parts is bored to the standard connector for its size. So the crane can be adjusted according to the layout of the worksite, in order to suit the specific material handling requirement and satisfy customer specific needs.
Maintenance method of double-color quartz tube liquid level gauge Maintenance method and steps of double-color quartz tube liquid level gauge: