By sieving efficiency is meant the percentage of the weight of the sieved product after sieving and the ratio of the fine fraction weight of the sieve feed which is less than the size of the sieve. In the middle    E - screening efficiency, % ;        Q 1 - the fine-grained weight of the sieved product that is smaller than the size of the mesh, gram;        Q 0 - the fines weight in the feedstock that is smaller than the size of the sieve, in grams. In actual production, since the sieving process is continuous, it is difficult to directly weigh the product weight of the screening operation. However, the products of the screening operation can be sampled and sieved, thereby obtaining the percentage of the fine fraction content of the sieved product, the sieve product and the sieve product which is smaller than the sieve size, so that the screening efficiency can be obtained by the following formula. Calculation: In the middle  Α—the fraction of the feedstock that is smaller than the size of the mesh, % ; Β—the fraction of the sieve product that is smaller than the size of the mesh, % ; θ - the fraction of the product on the sieve that is smaller than the size of the sieve, % . Screening efficiency is an important indicator of the quality of the screen work, which indicates the extent to which the screening operation is carried out and the quality of the screened product. Another indicator of the work of the sieve is the processing capacity. The screening efficiency and relative processing capacity of the sieve are shown in the table below. Screening efficiency and relative processing capacity of the sieve Sieve type Screening efficiency ( % ) Relative processing capacity per square meter of screen area Fixed sieve Vibrating screen Shaking screen Cylinder sieve 60 90 to 95 Below 90 50 0.2 1.0 0.4 0.1 Industrial 3D Printer,3D Printed Sand Sculpture,Rapid Manufacturing 3D Printer,Rapid 3D Sand Printing Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl3d-printer.com