Magnetostrictive displacement sensor detection control cylinder / proximity switch detection control cylinder. This product has a piston rod stroke detection device, which can meet the requirements of proportional control or servo control system equipment control accuracy, good linearity, good dynamic performance, and fast response speed.
Servo Cylinder,Hydraulic Servo Cylinder,Ultramotion Servo Cylinder,Electric Servo Cylinder Shanxi Guoneng Zhenghe International Trade Co., Ltd , https://www.sxsyysb.com
The basic structure of the new multi-tasking machine is the same as that of the 5-axis control type MC. It is the addition of the spinner function to the MC. Specifically, the spindle side of the rotary tool moves in the X, Y, and Z axis directions, and the table side on which the workpiece is fixed uses the B axis (the axis outside the Y axis) and the C axis (the axis outside the Z axis). Two axes are rotated. With this structure, it is possible to carry out the simultaneous milling of the 5-axis milling process, the rotation of the B-axis, and the rotary cutting which is comparable to the horizontal rotary table, and the rotary cutting which is comparable to the vertical rotary table by the C-axis rotation. .
It features a direct drive motor (DD motor) on the C axis. The maximum speed of the C axis reached 3000 rpm. This is one of the keys to achieving the grinding function.
Grinding is achieved by simultaneously rotating the spindle and the C axis in the opposite direction. The maximum speed of the spindle is 15,000 rpm. If the C axis is rotated in the opposite direction to the main shaft on this basis, the maximum relative rotational speed between the two is 18,000 rpm. At this time, the sand stone tool is fixed on the main shaft, and the maximum relative rotational speed of the sand stone tool and the workpiece will also reach 18,000 rpm. In principle, it is the use of this high speed relative rotational speed for workpiece grinding. The coolant is used during grinding as well as when cutting and turning.
The company did not showcase the new composite machining machine, but exhibited samples of the workpiece. These workpieces are cylindrical in shape and complex in shape, and are ground on the tapered wall of the inner circumference. In addition, the "mouth" portion of the outer circumference and the characters of the inner circumference are simultaneously processed by five axes, and the inner circumferential groove is formed by rotary cutting.
High control accuracy, good linearity, good dynamic performance, fast response time, etc.
Application characteristics
Used hydraulic cylinder
Mini Hydraulic Cylinder
Agricultural hydraulic cylinder
Application field
Equipment requiring high precision cylinder position, linearity and response speed.
Matsuura Machinery Co., Ltd. announced on April 12, 2006 at the "Mold Processing Technology Exhibition (INTERMOLD2006)", which was opened at "Index Osaka", and successfully developed a new composite processing machine "CUBLEX-25". In the case of a vertical Machine Tool (MC), a grinding function has been added to a multi-tasking machine with a turning machine function. In this way, in addition to the rotary cutting of the cutting and turning parts of the MC part of the existing multi-tasking machine, one machine can complete the grinding process. "Planned for the fall of 2006" (Songpu Machinery Manufacturing Co., Ltd.).