Shenzhen leather nozzle multi-purpose module spray, Foshan hot melt adhesive portfolio

Shenzhen leather multi-nozzle universal module spray, Foshan leather bag hot melt adhesive combination Contact: Ms. Li

Foshan Lobo Parker UES-b03 universal module spray (multi-unit multi-nozzle), hot melt adhesive combination

Out of plastic: small spiral, fiber

feature:
1. Optimize the body control module and use multiple combination seals to ensure that the leakage of glue is prevented from forming after long working hours.
2, the use of heated built-in filter structure can effectively eliminate impurities and carbides to prevent nozzle clogging
3, the use of built-in gas heating device to ensure the stability of the spray pattern
4, through the matching of different nozzles can choose a variety of fiber spray adhesive and other spray mode
5, reduce the user's purchase costs
6, simple maintenance services, high stability
7, using a combination of configuration, spraying the longest up to 3200mm

specifications:
Edge control: ±2 mm (depending on the nozzle)
Distance from nozzle to substrate surface: 25---70 mm
Maximum glue volume: 90 grams per minute per nozzle @ 5000 cps
Maximum weight: 15 GSM @ 300 meters/minute
Adhesive viscosity range: 1000 to 8000 centipoise
Working temperature: up to 200°C
Temperature sensor: PT100 or K type
Air pressure: 1.5 kg/cm2 ------3.5 kg/cm2
Operating voltage: 220 VAC 50/60 Hz, single phase
Control voltage: 24 VDC