Rubber Gasket / Washer

Overview

A Square-Ring is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Square-Rings would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Square-ring in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Square rings are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Square Ring Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard square rings have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Square Rings:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Overview

A Square-Ring is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Square-Rings would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Square-ring in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Square rings are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Square Ring Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard square rings have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Square Rings:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Niobium

An alloy composed of metal Zirconium is added to metal niobium. Zirconium mainly exists in the state of solid solution in niobium alloy. When there is a small amount of carbon or adding a small amount of carbon, a small amount of carbides and oxides are dispersed and precipitated. Therefore, niobium and zirconium make the alloy have higher strength and good plastic processing performance. Good oxidation resistance and alkali metal corrosion resistance.

Pure Niobium Plates,Pure Niobium Sheets,Pure Niobium Sheet,Pure Niobium Sheet And Plate

Baoji Rowlyn Metal Materials Co., Ltd. , https://www.rowlynti.com