The hollow brick machine is a brick machine used to produce hollow blocks. The blocks produced by the brick machine do not need to be burned, and can be used after natural curing to reach a certain strength. The hollow non-burning brick machine has the characteristics of structure, high pressure, high yield, strong rigidity, good elasticity, fully enclosed automatic circulation lubrication, and automatic quantitative feeding. The main raw materials for the production of hollow brick machine come from river sand, fly ash, slag, tailings, gangue, etc. It can press cement bricks, refractory bricks, and non-fired bricks. The pressed bricks fully comply with national standards. National construction needs and has significant social benefits. The use of this equipment and process technology can turn waste into treasure, save energy and reduce consumption, protect land, save cultivated land, and benefit after it is of great significance. Using this equipment will bring you surprises and Considerable economic benefits. Hollow Block Machine,Maunal Hollow Block,Hollow Brick,Hollow Block Making Machine Zhengzhou SMART Machinery Manufacture Co.,Ltd , https://www.simamax.com
At the beginning of this year, polypropylene workshop staff relied on scientific and technological progress to optimize the installation process, and in the full implementation of the “safety, stability, long, full, and excellent†operation of the device, deepened the standard work, carefully compared the advanced equipment level, actively looking for gaps, and thinking about countermeasures. The implementation of a number of energy-saving techniques, pay close attention to energy saving work. In the work, the workshop focuses on management and technical energy conservation, clarifying management responsibilities, clearly stipulating energy-saving targets, and increasing assessment of energy conservation and consumption reduction to ensure the smooth progress of energy conservation and consumption reduction. The workshop focused on the actual conditions of the circulating water and steam consumption of the condensate recovery tank. After the demonstration of the technical renovation of the condensate recovery tank, the workshop decided to reconstruct the condensate recovery tank from the outlet of the condensate pump to the steam tracer. The pipeline of the plate, in place of the low-pressure steam of the steam tracing plate, can reduce the condensate temperature of the condensate recovery tank and reduce the amount of circulating water. On the other hand, it can reduce the amount of steam and reduce the energy consumption of the device. After the successful technological transformation, the hourly steam consumption drops by more than 200 kilograms, and more than 1,700 tons of steam can be saved annually. This measure can reduce the overall energy consumption of the device by 0.93 kilograms of standard oil per ton of polypropylene. For this reason, according to the production conditions of the polypropylene device, the workshop decided to disable one set of steam tracing trays with unit No. 700 in isolation. At the same time, 10 sets of high-efficiency steam traps were replaced on the site for one set and two sets. The energy-saving effect reaches the best condition.
The advantage of using hollow non-burning brick machine: the production raw materials use factory waste, fly ash, construction waste and other waste materials, which replaces the traditional brick machine production and use a large amount of land, because the hollow brick protects the precious land of our country, and at the same time realizes the renewal Utilization, and the performance of hollow bricks is more suitable for construction use than clay bricks, which is why the country also advocates the development of the hollow brick market.
The hollow brick machine is a brick machine used to produce hollow blocks. The blocks produced by the brick machine do not need to be burned, and can be used after natural curing to reach a certain strength. The hollow non-burning brick machine has the characteristics of structure, high pressure, high yield, strong rigidity, good elasticity, fully enclosed automatic circulation lubrication, and automatic quantitative feeding. The main raw materials for the production of hollow brick machine come from river sand, fly ash, slag, tailings, gangue, etc. It can press cement bricks, refractory bricks, and non-fired bricks. The pressed bricks fully comply with national standards. National construction needs and has significant social benefits. The use of this equipment and process technology can turn waste into treasure, save energy and reduce consumption, protect land, save cultivated land, and benefit after it is of great significance. Using this equipment will bring you surprises and Considerable economic benefits.
Dushanzi Petrochemical Company's polypropylene plant employees put energy conservation and consumption reduction at the top of the list. Through in-depth technical research, process optimization, and device compliance, the technological level of polypropylene devices has been continuously improved, and the availability of equipment and equipment remains high. The production capacity of the device has also been continuously improved, and the output has been successively updated. According to statistics on October 31, energy consumption has dropped by 7.25 percentage points.
The advantage of using hollow non-burning brick machine: the production raw materials use factory waste, fly ash, construction waste and other waste materials, which replaces the traditional brick machine production and use a large amount of land, because the hollow brick protects the precious land of our country, and at the same time realizes the renewal Utilization, and the performance of hollow bricks is more suitable for construction use than clay bricks, which is why the country also advocates the development of the hollow brick market.