First: the two bearing blocks are uneven, or the rotor of the motor is not concentric with the rotor of the Raymond mill, which will cause the bearing to be subjected to additional load shock, resulting in poor heat dissipation of the bearing. Reminder: In this case, stop the machine immediately to eliminate the damage to avoid early damage of the bearing. Second: too much lubricant in the bearing, too little or aging is also the main reason for the bearing heat dissipation is not good. Warm reminder: According to the use of the book requirements, quantitatively fill the lubricant on time, the general lubrication accounts for 70% of the bearing space. %-80%, too much or too little is not conducive to bearing lubrication and heat transfer. Third: the matching of the bearing cap and the shaft of the Raymond mill is too tight, and the bearing and the shaft are too tight or too loose, which will lead to poor heat dissipation of the bearing. Warm reminder: Once this happens, the bearing should be stopped and removed. Trim the friction parts and reassemble as required. The bearing is the most fragile component of the Raymond mill. Our staff should pay attention to the temperature rise of the bearing and the noise of the bearing part at any time. Now it is necessary to deal with the abnormality as soon as possible, and the right medicine can fully recover. Outdoor Trampoline,No Spring Trampoline,Underground Trampoline,Trampoline Outdoor Jiangsu Baoxiang Sports Equipment Co., Ltd , https://www.skyboundup.com
The poor heat dissipation of the bearing is a common phenomenon of Raymond mill. This phenomenon will directly affect the normal operation and production efficiency of Raymond mill. The common heat dissipation of the mill's bearings is mainly due to the following phenomena: