Polyethylene wax (PE wax), also known as polymer wax, is called polyethylene wax for short. It is widely used because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance. In normal production, this part of wax can be directly added to polyolefin processing as an additive, which can increase the gloss and processing performance of products. As a lubricant, it has stable chemical properties and good electrical properties. Polyethylene wax has good compatibility with polyethylene, polypropylene, polyvinyl acetate, ethylene-propylene rubber and butyl rubber. It can improve the fluidity of polyethylene, polypropylene and ABS, and the release ability of polymethylmethacrylate and polycarbonate. For PVC and other external lubricants, polyethylene wax has a stronger internal lubrication effect.
Application of polyethylene wax pe wax for pvc pipe,pe wax h110,pe wax 1703 Henan Chuange Industry CO.,LTD , https://www.cgpvcresin.com
1 Set Manual Un-coiler
1 Unit Feeding Guide
1 Set Roll Forming Machine
1 Set Hydraulic Cutting
1 Set Hydraulic Station
1 Set Control Box
3 Pieces Run-out Table   Â
 
Technical Parameters
Â
Simple Decoiler (Quantity: 1)
Loading Weight:10T
Expansion: Manual
Steel Coil Inner Diameter: 508-610mm
Steel Coil Outer Diameter: Max 1500mm
Â
Â
Forming Station (Quantity: 1)
Main Structure of the Machine: 36# "H" beam steel foundation, wall plate structure
Rolling Stations: 10 stations (subjected to final design)
Forming Speed: Approx. 6-10m/min.
Diameter of Shaft: 80mm
Material of Shaft: 45# steel with heat treatment and high-frequency quenched HRC60-62
Material of Roller: 45# steel with quenching treatment and chroming to 0.05mm thickness
Transmission: 16A single row Chains-bracket
Motor Power: 18.5KW (subjected to final design)
Â
Post-Cutting (Quantity: 1)
Material of Cutting Mold: Cr12 Steel with quenched treatment HRC 60-62
Cutting Length and Quantity: Clients can set the required length and quantity on the PLC touch screen
Tolerance of Cutting Length: +/-2mm
Hydraulic Pump Power: 7.5KW (subjected to final design)
Pressure of Hydraulic Station: >=16Mpa
Â
Output Table (Quantity: 3 Units)
Length x Width x Height: Â Â Â Â Â Â Â Â Â Â 2.0m x 0.6m x 0.9m
Supporter Roller: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ASTM 1045 with Chrome
Dia. of Rollers: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 55mm
Color: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â blue (or based on customer's request)
Â
Control System (Quantity: 1)
PLC Control Box: 700mmx1000mmx300mm
Computer Control System: Panasonic PLC
Encoder: Omron Brand
Voltage: 380V, 50Hz, 3 phase
Â
Â
1. Concentrated masterbatch and filling masterbatch. As a dispersant in the processing of color masterbatch, it is widely used in polyolefin color masterbatch. It has good compatibility with polyethylene, polyvinyl chloride, polypropylene and other resins, and has excellent external and internal lubrication effects.
2. PVC profiles, pipes and composite stabilizers are used as dispersants, lubricants and brighteners in the molding and processing of PVC profiles, pipes, pipe fittings and PE. PP to enhance the degree of plasticization and improve the toughness and surface smoothness of plastic products. They are widely used in the production of PVC composite stabilizers.
3. The ink has good light resistance and chemical properties. It can be used as the carrier of pigments, improve the wear resistance of paints and inks, improve the dispersion of pigments and fillers, and have good anti-settlement effect. It can be used as the smoothing agent of paints and inks, so that the products have good luster and three-dimensional feeling.
Wax products are widely used in the production of floor wax, car wax, polishing wax, candles, crayons and other wax products to improve the softening point of wax products, increase their strength and surface gloss.
5. The cable material can be used as the lubricant of the cable insulation material to enhance the diffusion of the filler, improve the extrusion molding rate, increase the mold flow, and facilitate the demoulding.
6. Hot-melt products are used as dispersants for various hot-melt adhesives, thermosetting powder coatings, road marking paint, marking paint, and have good anti-settlement effect, and make the products have good luster and three-dimensional sense.
As a rubber processing aid, rubber can enhance the diffusion of filler, improve extrusion molding rate, increase mold flow, facilitate demoulding, and improve the surface brightness and smoothness of the product after demoulding.
8 Cosmetics make products have good luster and stereoscopic feeling.
9. Injection molding saves machine power lubrication and enhances product surface gloss.
Model NO.: 750/260
Trademark: naxuan
Transport Package: Packing in The Container
Specification: 8500*1200*1500
Origin: China
Composition of the machine