There are many test chamber products on the market, such as mold incubators, biochemical incubators, artificial climate chambers, etc. The functions and uses of each test chamber are different. Among them, constant temperature and humidity incubators are widely used and many experiments It can be used for microbial cultivation, physical performance test of objects, breeding of insects and small animals, plant germination, biological product storage, chemical storage and drug test. It is used more frequently. In order to extend the service life of the equipment, To have a good working performance, it is necessary to do the following maintenance work.
Cookware with bakelite handle manufacturer in China
Cookware with bakelite handle,for all of our cookware,we can use bakelite handles for them. The bakelite is non-heat-conducting materials.For the cookware with bakelite handle,you don't need to wear the oven gloves when you picking up or touching the handle during cooking. We can do different finished for the body of cookware with bakelite handle,mirror finished or satin finished.Welcome any OEM designs. Please contact with us for more details.
Cookware With Bakelite Handle,Bakelite Handle Cookware,Copper Bottom Pans,Copper Bottom Cookware Jiangmen Yuesheng Metal Products Co., Ltd. , https://www.hkbestgain.com
1. Cleaning and maintenance of the inside and outside of the box.
â‘ The internal impurities should be removed before operation.
â‘¡The power distribution room is cleaned at least once a year, and the dust in the room can be removed by a vacuum cleaner when cleaning.
â‘¢The exterior of the cabinet must also be cleaned more than once a year, first wipe it with soapy water.
2. Inspection and maintenance of the humidifier. The water storage in the humidifier should be replaced once a month to ensure that the water is clean, and the humidification water tray should be cleaned once a month to ensure smooth water flow.
3. Clean the condenser dust. The condenser should be cleaned regularly and maintained monthly. Use a vacuum cleaner to suck out the dust attached to the condenser's heat sink or use high-pressure air to spray dust.
4. Check the wet bulb water level of the constant temperature and humidity incubator and adjust the water level of the water tank not to be too high, so that the water overflows the water tank or is too low, so that the wet bulb test cloth absorbs water abnormally, which affects the accuracy of the wet bulb. The water level remains about six points. Full. The water level of the water tank can be adjusted to adjust the height of the water tank.
The above is about the internal and external maintenance details of the constant temperature and humidity incubator. Of course, this is only the basic work of the daily use and maintenance of the instrument. There will be many other matters that we need to pay attention to during the operation. Friends who don’t understand are welcome to consult us. Instrument Network. 