There are many types and structures of auto stamping parts, and the materials, specifications, and technical requirements of different types of stamping parts vary greatly. As an important part of the car, it has the following characteristics: Auto Stamping Parts,Sheet Metal Stamping Dies,Aluminum Stamping Parts,Stamping Part Design,Automotive Stamping Parts Pro Success Development Limited , https://www.prosuccess-metal.com
We are a professional manufacturer for conical twin screw barrel, pls check the specifications as below: 35/70, 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188
Cincinatti, Krauss Maffei, Weber, Amut, Battenfeld, etc. Designs are available.
Pls check technical info. As below:
Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)
4)9Cr18MOV
5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Experienced manufacture, we will be the best choice. Experienced manufacture, we will be the best choice.
(1) There are various varieties. The car body, chassis, wheels, compartments, radiators, etc. are all automotive stamping parts.
(2) Large in size and complex in shape, including body panels with irregular shapes, frames with a length of more than ten meters, disc-shaped wheels, etc.
(3) High precision and excellent surface quality. Stamping is a non-cutting process, which is produced by precision molds, with high precision and good dimensional consistency.
(4) Low cost. Stamping is an efficient production method. In mass production, a fully automatic stamping production line is used to achieve high production efficiency. On a mass production scale, raw material consumption is low and production costs are low.
If you need stamping part design service to produce sheet metal stamping dies, aluminum stamping parts, etc., please contact us.