Parallel Twin Screw,Parallel Twin Screw Barrel,Barrel Bimetal,Bimetallic Quality Screw And Barrel Zhoushan Qunying Plastic Machinery Manufactory , https://www.qunying-screw.com
In the face of the increasingly fierce competition of building material machinery manufacturers in recent years, Kebao Machinery Co., Ltd. has persisted in seizing the commanding heights of the market, and through the implementation of technological innovation, it has made products better, more updated and better, and has maintained its technological advantages year after year. KBH high-efficiency vertical dryer is a patented product of COBB. It effectively solves the problems of large investment in traditional drying equipment, high operating cost, high coal consumption, serious environmental pollution, and difficulty in sealing. After the introduction of the product, it soon became the mainstream product of domestic drying equipment. However, in order to maintain its leading edge, Kebao Machinery Company did not meet the achievements, but continued to sum up experience, analyze the inadequacies, and strive to make the product more adaptable. The needs of the market. In January of this year, Cobb Machinery Co., Ltd. cooperated with Southeast University to develop a new generation KBDH dynamic vertical dryer and a new dynamic vertical drying system based on the original KBH high efficiency vertical dryer. The technology of this project is of international advanced level. The specific content is summarized as "one model, four firsts": "a model", namely establishing the digital design parameter model of the drying system, on-line detection and intelligent control of materials, wind and temperature. “Four for the first time†means the first use of a high-yield, high-efficiency heat exchange device (heat exchange using suspended, rotary, vibratory, and static devices); for the first time, the Karl's flow coefficient and rest under different operating conditions for different materials Angular, designed the internal static heat exchange parts angle, hole rate and opening size, make the material heat exchange scientific and rational; for the first time using the principle of fluid dynamics to completely reform the hot gas into the device to form an efficient energy-saving system; the first use of a unique diameter Structural design and advanced secondary air inlet method, adapted to the temperature of 300 °C ~ 350 °C waste heat drying materials. The new dynamic drying energy-saving equipment effectively solves some problems in the vertical dryer. At present, the project has applied for two invention patents and eight utility model patents.
KBM's in-mill rebuilding technology and equipment are another key product of Kebao Machinery Company. After the patent was obtained, along with KBH high-efficiency vertical dryer, it passed provincial scientific and technological achievements and provincial new product appraisal in 2003. It has been rated as the top 10 industrial products in the building materials industry in Jiangsu Province. The product has increased production capacity by increasing the powder separator device, the activation device, the material separation, and the adjustment device, etc., and adjusting the position and optimizing the ball grading. , high early strength, high surface area products, welcomed by users. In order to further meet the needs of the market, Kebao Machinery Co., Ltd. has also developed the comprehensive rebuilding technology of KBMX cement mills. In the medium and long mills, KBM mill internal reforming technology and equipment are used. Generally, the desired results can be achieved, and KBM will be used in medium and short grinding mills. The combined use of the in-mill rebuilding technology and the company's other patented technology, the KBX wind-suspended ultra-fine rotor classifier, will better achieve high-strength, high-specific surface area products, maximize the efficiency of grinding, and open the way On the basis of grinding, the output increased by 50% to 100%, the specific surface area increased by 25m2/kg, and increased by 15% to 30% when the closed-circuit grinding foundation came on stage, and the specific surface area increased by 25m2/kg. Wuhan Meishan Tianqiao Cement Co., Ltd. used the KB-MX mill selection technology for powder screening and spare parts for closed-loop cement grinding technology transformation; Dezhou Jinghua Group (Plain) Dam Cement Co., Ltd. selected this technology for 3 times All of these have achieved high output and high specific surface area, which fully reflects the advanced, reliable, and practical application of the screening technology in KBM and KBMX mills. It is precisely because of the persistence of technological innovation that products can be made to perfect day by day, and they will be the first in the fierce market competition.
At present, the company has formed a team of high-grade, sophisticated and sharp talents with both professional knowledge and rich practical experience. The company currently has 173 professional technicians such as machinery manufacturing, electronics, silicates, and industrial automation. Among them, there are 7 senior engineers and 46 engineers, and 12 professors from Southeast University, Nanjing Cement Design Institute, Hefei Cement Design Institute, Nanjing Institute of Chemical Technology and other institutions are invited to serve as members and consultants of the research center and establish with these institutions and research institutes. Technical collaboration and joint technical research. In 2005, the company cooperated with Yancheng Institute of Technology to develop the “Using Low and Mid-Temperature Remaining Heat Material Drying Technology†and applied for the 2005 Jiangsu Provincial High-Tech Research Project. In 2006, Kebao Machinery Co., Ltd. cooperated with Southeast University to research and develop the “Dynamic Energy-saving Drying Equipment for High Energy Consumption Cement Industry†project, and applied for the 2006 Jiangsu Province Science and Technology Key Bidding Project. While paying attention to the building of talents, the company also increased its hardware investment. In 2006, the company invested 54 million yuan in Cobb's production base and started construction in the Yancheng Economic Development Zone. The office building of the R&D center has also started construction. The company will sell its annual sales. 2%, as a research and development fund, has invested more than 10 million yuan in R&D funds in recent years. At present, the company has owned 15 national patents and has filed 12 patents. The technology with independent intellectual property rights has greatly improved both in quantity and quality.
In recent years, Jiangsu Kebao Machinery Manufacturing Co., Ltd. has frequently reported in the tendering project that they have won the bid with their clear advantages in technology and services, and have won praise from the judges for their convincing results.