Dongfeng docking garbage truck

Docking garbage truck Dock garbage truck Garbage trucks are used for municipal sanitation, large-scale factories and mines to transport all kinds of rubbish, transport residential garbage, and can compress and crush the loaded rubbish to increase its density and reduce its volume. Garbage collection and transportation efficiency.

1. The maintenance of the chassis and engine parts of the docking garbage truck shall be carried out in accordance with the instructions of the chassis manual. 2. The new docking garbage truck is in the walking phase. The driving range is within 1500-2500km and lift box (pushboard) discharge within 900 times. The loading capacity is 70% of the rated load quality. The engine may not be throttled with manganese. . 3, after the cylinder work 300 times, should replace all the working oil. Unscrew the hydraulic oil drain plug, and then inject new oil from the upper oil hole. Then start the docking garbage truck engine. Test the cylinders twice and confirm that the work is reliable. 4. Docking garbage truck high-pressure fuel pipes are replaced regularly every two years. Cracks, damage, and swelling of the shoulders should be promptly replaced when they are used. 5. Regularly inspect the oil leakage of the docking garbage truck hydraulic system and repair and replace the oil seal in time. 6. The butt-type garbage truck is lubricated with a universal lithium-based grease (GB5671-85) for docking garbage truck. It can be injected from the nozzle with an oil gun until it is extruded in the gap. 7. Docking garbage trucks are used to clean the interior surfaces of vehicles, trucks and tampers after the daily operation. Always check the hydraulic oil stock, regularly add lubricant to each moving part, and lubricate the surface of each rail. 8. Regularly check the butt-type garbage truck and adjust the working pressure of the gear pump; check the filter element of the oil filter to remove impurities on the surface or replace the filter element; regular replacement of hydraulic oil is mainly used for the sanitation municipal and large-scale factories and mines to carry various garbage, and can also transport Ash, sand, stone, soil and other bulk building materials can also be used to transport ore or coal in mines or coal mines.

1. Air path: Increase the amount of air that enters the cylinder of the engine per unit time to reduce the intake resistance of the engine. This is the goal of the engine air intake. The usual practice is to replace the high-traffic style of the original position. In addition to installing air blast stickers, placing it in the air box can release a large amount of negative ion air by decomposing the incoming air clusters through its own energy release function. The disordered movement of the original air molecules became a straight line of neat rows, allowing the engine to reach a state of lean combustion, making the engine speed climb faster and stronger.

2. Oil circuit: Gasoline is atomized into the cylinder of the engine after being atomized by the fuel injector, and the degree of atomization of gasoline determines the mixing effect between it and air. Therefore, the better the atomization of the gasoline, the more favorable it is to mix with the air and fully burn. Among the numerous modifications for the oil circuit, the addition of a physical fuel booster is an effective method, and the increase in the flow rate of gasoline is more refined. The latest use of rare-element energy aprons, after heating by the engine, releases far-infrared rays to 'decompose' fuel molecules that have flowed through 'to decompose' into single molecules. The atomization effect of the fuel nozzle is better.

3. Circuits: The circuit is further divided into ten major systems. Nowadays, the number of electronic and electrical devices for safety, intelligence, and entertainment is increasing. Automobiles use multiple electronic devices at the same time. The engine power is (air conditioning, audio, lighting, Electric window, etc.) Dispersion, commonly known as “grabbing power”, can easily result in inaccurate transmission and reception of signals by various sensors. It is important to maintain the vehicle’s power system. The original battery is used to supplement electric energy, but the discharge rate of the battery cannot keep up, and the battery supplies the engine with electricity. The stability, the ignition efficiency of the spark plug, the electrical conductivity of the ignition wire, and the balance of positive and negative voltages all have a great influence on engine power. To this end, we can replace the ignition line, spark plugs, and install auxiliary facilities such as the vehicle power protector current balancing device to reduce the electrical load, increase the ignition energy, increase the flame propagation speed and shorten the flame propagation distance, so that the engine will burn better. . Reduce carbon deposition and reduce emissions.