Big trucks are very common in our lives. No matter what kind of road you drive, you can almost see the big trucks. If we have a large truck in front of us when driving, we must pay attention to it. Due to the high driving position of large trucks, the blind spot is relatively large. If we do not pay attention when we are overtaking, we can easily cause an accident. A few days ago on the Shen-Hai Expressway, there was an accident with a large truck chasing a Mazda sedan, causing serious damage to the rear of the car, and the large trucks tipped over to the ground. The most important thing is that the big trucks were loaded with some expensive luxury cars at the time. Vehicles with a total value of 10 million like Porsche, Land Rover and so on turned sideways on the road, and their losses were not small. However, the cause of the accident was because Mazda owners tried to accelerate the overtaking of large trucks, resulting in accidents. Then, in the driving process, if there is a heavy truck in front of you and you want to overtake it, what should you do? First, you should drive away from a large truck about 100 meters away, observe the road conditions in front of you, and in the event of a good road ahead and a good line of sight, use the overtaking turn signal, horn, and strobe lights, and observe the direction of the truck. The second step is to observe whether the truck is driving on the road and whether there is a tendency to shake left and right. If not, you can increase the throttle and quickly overtake it. The last step is not to go straight to the driveway after it has passed. Instead, it is best to go back to the normal lane with a large truck about 500 meters away. And in the entire process, both hands must grip the steering wheel, and when close to the truck, the horn and strobe lights must also be carried out at the same time. Therefore, we must pay attention when we encounter a truck loaded with goods on the expressway. We can overtake the supercar as much as possible. After all, a cart with a full load of goods is not safe. But you can't go beyond the safety distance. If it is hard, it will not only threaten its own safety but also affect the driving safety of others.
We are the specialized and top manufacturers in China and We offer full set Seed Processing Line solution. Whole Seed Cleaning Plant is from Pre-cleaning, Fine cleaning, Destining, Gravityseparating, Beans polishing,Seed coating, Last seed weighing and packing.
The Seed Cleaning & Processing Line is composed of several single machines. Base on different grain type and processing grain, we will suggest appropriate grain cleaning machines. These grain cleaning machines arecollocated freely. Between each machines, there are Bucket Elevator , Inclined Evator or other conveying equipment to link up.
Seed Cleaning & Processing Plant has followingadvantages:
Easy to setup, machines easyto move and can be placed freely.
Save labor, there are middleconveyors to transfer grain from one machine to another.
Effective and low cost, singlemachines compose a seed processing line improve the working performance. Lowproduction cost makes it hot sale.
Above flexibility andconvenience makes Seed Cleaning & Processing Plant makes it becoming hot sales item.
Seed Processing Line installationeffect and introduction.
This Grain Cleaning & Processing Plant iscomposed of 5XZC-5DX Seed Cleaner & Grader, 5XZ-5 Gravity Separator, DTY Bucket Elevator, 5BYX-5 Seed Coating Machine, and HLD-50 Bagging Scale System.
Working flow: The seeds arefed into 5XZC-5DX Seed Cleaner &grader first. Seed cleaner & grader will remove the dust, lightimpurity, oversize and undersize impurity before seed flow into 5XZ-5 gravity separator. During seeds cleaned by Gravity Separator, the seeds are separated by density difference. Thepartially eaten seeds, immature seeds, insect damaged seed, sick seeds, moldyseeds are separated from good healthy seeds. Then seeds go on being lifted by DTY Bucket Elevator, falling into the 5BYX-5 Seed Coating Machine. During the seed coating procedure, the chemical,fertilizer or other protective liquidity will be coated to seeds' surface andimprove seeds' germination rate. Finally seeds being transferred to Weighing Scale . Seeds will be weightedand packed to bags ready for sell.
Grain Processing Plant Grain Processing Plant,Grain Processing Machine,Grain Wheat Processing Plant Hebei HELIDA Grain Selecting Machinery Technology Co., Ltd. , https://www.grainseedscleaner.com
