Radar level meters are widely used in metallurgy, building materials, energy, petrochemical, water conservancy, food and other industries. The product is suitable for harsh environments such as high temperature, high pressure, vacuum, steam, high dust and volatile gases. Continuous measurement of different material levels. The instrument's main technical indicators are equal to or better than similar products at home and abroad, and it is easy to install and debug. It can be used on a single station or on a network. Radar Level Meter Troubleshooting: 1. If the level alarm occurs within the applicable range, then: a. The level drops below the safe distance and the alarm will disappear immediately; b. This alarm occurs when the initial commissioning tank is empty and can be eliminated by interference suppression. 2. When there is an interference echo in the container, then it should: aã€Check whether the installation of the level gauge is correct and eliminate installation interference; b, can be ruled out by fixed target suppression. 3. If the output current is always 4mA and there is no error alarm, then check if the output is 0. 4. If the meter is blocked and full canisters are displayed at the same time, then the parameters should be set. If it is determined that the parameters are correct, the empty can spectrum can be solved.
1.Metal Stamping, cold stamping,hot stamping,Brass Stamping,metal stamping parts brass clip
6.After-sales-service: take 100% responsibility for any quality issues!
Deep Drawing Brass Stamping Parts Brass Stamping,Metal Stamping Part Brass Clip,Custom Brass Stamping,Brass Hot Stamping Baoding Henglian Mechanical Co.,Ltd , https://www.hengliancasting.com
Deep Drawing Brass Stamping Parts
2.OEM,can be customized
3.Material:copper,brass
4.Durable
5.Tolerance Control: from +,-0.003MM
