Gravitational Gold Concentrator
It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.The device has the following characteristics:
1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.
2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.
3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.
4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.
5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment
6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.
Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.
Gravitational Gold Concentrator,Gold Extraction,Gold Recovery Equipment,Gold Washing Equipment Changchun Gold Research Institute Co.LTD , https://www.ccgrizb.com
1.ADVANTAGE:
1.Saving 10%-30% cost than others.
2. Direct factory price
3. Life:3, 000, 000 time
4.2D and 3D provided
5. Quick T1Â Â time: 25-40 days
6.More than 15 years experienceÂ
Â
2.PICTURE:
 3.MOULD  DESCRIPTION:
1.Cavity:1-72
2.Mould base material :P20 , 45# , 4CR13 , .ECT
3.Core&Cavity material :Â S136,718, P20,2378,2316,4CR13,P20 .ECT
4.Runner: Cold /Hot (LOCAL BRAND,HASCO,YUDO,HUSKY .ETC)
5.Life time:3,000,000 shots
6.Quick T1 time:25-40 days
7.Package:wooden caseÂ
Â
4.MOULDÂ Â MANUFACTUREÂ Â PROCESS:
Cap Mould : grinding→fly-cutter →CNC Milling→drilling→lathe→boring lathe→electric pulse →fine fly-cutter→polish→electroplate→install
Â
Preform Mould: grinding→drilling→lathe→boring lathe→fine fly-cutter→polish→electroplate→install
Need vale ,itself-locking :new advanced needle vale gate system.each cavity is self-lock independently to ensure low decent ration of product.
The excellent hot runner design assures uniform heating and greatlyimproves the quality of plastic products
Â
5.AFTERÂ Â SALEÂ Â SERVICE:
Any mould problem,we will provide free maintenance service
Â
Â
6. FLOW CHART
1
Sample or 2D,3D drawing from customer
2
Bulid 2D,3D drawing
3
CAD mould design
4
Send drawing to customer to confirm
5
Parts inspection/CNC machining/EDN machining
6
Mould assembly
7
Mould testÂ
8
Send sample to confiomÂ
9
Dilver the mould
7.CONTACTÂ Â Â ME:
 
