Ultramicro crusher enters the climax of development

It is understood that although the domestic research on ultrafine grinding technology started late, but after years of efforts, so far, China has been able to produce various types of ultra-fine grinding equipment, its performance can be comparable with foreign advanced models, basic Can meet the needs of China's actual production. Modern production not only pursues high production efficiency and quality of finished products, but also develops in the direction of environmental protection and energy conservation. This is also true in the pharmaceutical industry. Looking at the requirements of modern society's productivity, the overall trend of China's material ultrafine grinding technology is toward the direction of low cost, high efficiency, strong controllability, good dispersion, and stable quality. Various types of ultrafine crushing equipment have put forward higher technical requirements, and China's ultrafine crushing equipment has entered the development climax.

Ultrafine crusher is favored by the Chinese herbal medicine industry

The prevalence of Chinese medicine has boosted the innovation of deep processing technology and equipment in the Chinese medicine industry in China. In many devices, ultrafine grinding technology has achieved deep processing of Chinese herbal medicines to a large extent. Although it is a high and new technology that has only been developed in recent years, ultrafine grinding technology can process raw materials into micron or even nanometer fine powders. The application range is very extensive.

Studies have shown that ultrafine grinding technology has achieved breakthroughs in Chinese herbal medicines such as breakage and evacuation. Compared with traditional Chinese medicine preparations obtained by conventional techniques, traditional Chinese medicine preparations obtained by ultrafine grinding technology can significantly improve efficacy and facilitate human absorption. One of the great features of the ultrafine crusher is its ability to increase drug absorption and increase its bioavailability. The size of the drug particles and the structure of the powder are important factors affecting drug absorption. After ultramicro-treatment of traditional Chinese medicine, the particle size is even and fine, the specific surface area increases, the porosity increases, the drug can be well dispersed, dissolved in gastrointestinal fluid, and the contact area with the intestinal tract is increased, and it is easier to be stomach. Intestinal absorption, whether it is a topical patch or an internal capsule, can be achieved with a small dose to achieve the original efficacy after ultra-micro crush, for mineral medicine, equivalent to a part of water-insoluble substances, after ultramicro treatment Because the particle size is greatly reduced, it can increase its dissolution in the body, absorption rate, and increase its absorption.

In addition, ultrafine pulverizers are also conducive to retaining biologically active ingredients for improved efficacy. In the process of ultrafine pulverization, no overheating phenomenon can be controlled, even at a low temperature, and the pulverization speed is fast, which is favorable for retaining the bioactive components and various nutrient components that are not resistant to high temperatures, thereby improving the efficacy of medicine such as pearls. The traditional method of processing will destroy some of its components, and ultra-micro crushing at a low temperature of around -67°C will preserve the active ingredient in a more complete manner and enhance its anti-aging effect. Ganoderma lucidum is rich in amino acids and trace elements. It has the functions of activating immune function, anti-tumor, and anti-thrombosis. After ultrafine crushing, the therapeutic effect becomes more complete.

It can be seen from the above that the ultrafine crusher has fully demonstrated its irreplaceable charm in the field of Chinese medicinal materials. However, the industry cannot meet this demand. In the face of increasing market demands, related companies still need to continuously improve their technologies to meet market development.

Proper use of ultrafine pulverizers to improve the bioavailability of drugs

The ultrafine crusher can effectively crush any fibrous, high toughness, high hardness or material with a certain moisture content. It is especially suitable for crushing requirements of traditional Chinese medicines such as cell wall breaking to improve the bioavailability of drugs and the use of conventional methods. Unable to reach the material required for fineness.

Today I will talk to you about the correct use of Superfine Crusher:

1、After opening the box, AMD crusher carefully inspects whether there is any damage in the equipment during transportation, and then puts the high machine and auxiliary electrical control device in place, and then connects the main auxiliary machine pipe road, each pipe flange When assembling, the sealant “609” shall be used to seal the liquid sealant to ensure the tightness of the pipe. At the same time, the flanges of the single machine and the pipe shall be connected with the grounding wire and grounded so as to avoid dust explosion caused by electrostatic sparks.

2. Before each stand-alone test run, check whether there are metal objects in the machine and exclude if any. Whether the bolt is firm, the tightness of the belt, the reliability of the protective cover, etc.

3. Start the steady state of each motor in the following order, close the damper to start, crusher -> precipitator -> grading device -> screw feeder -> open damper -> air closer.

4. After five minutes of running an empty vehicle, the operator must carefully observe various instruments on the control cabinet and wait until the no-load current is stable. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise the feed should be reduced to ensure that the normal operation of the discharge electric can work at regular intervals.

5, can be shut down in the following order, screw feeder -> after running for five minutes with the stop grinding host, dust collector, classifier -> air lock.

6. The stepless shifting handle of the classifier can be used to change the speed of the grading wheel, and at the same time, the fine adjustment of the products can be achieved. If the product size is required to be fine, the rotation speed can be increased. On the contrary, the rotation speed can be reduced and the particle size can be increased.

Increase scientific research investment to promote the development of ultra-fine pulverizers to high-efficiency, energy-saving and environmental protection

The ultrafine crusher has just been developed and used in the industrial area. However, with the continuous updating of technology, it has now adapted to various fields. The production of ultrafine powder for traditional Chinese medicines by many pharmaceutical companies has reached a large-scale production capacity and has filled the domestic market. Blankness is a milestone for the development of micro-milling equipment.

Since the ultrafine crushing technology was overcome by domestic technology companies, the high price of the ultrafine crusher has been rapidly lowered. At present, it has been widely used in ultrafine crushing processing of valuable Chinese medicinal materials such as Cordyceps, pearls, Ganoderma lucidum spore powder, and ginseng. Greatly improved the utilization of herbs, but also greatly improved the efficacy.

However, after the crushing of expensive Chinese herbal medicines, there have been some problems, such as the discoloration of herbs, which indicates that as a new type of machine, its development will certainly not be one-step, and it needs continuous improvement and improvement. The main problem of the microcrusher is the low yield, the traditional Chinese medicine containing sugar and oil can not be well crushed, the temperature of the crushing process is high, and the energy consumption of the whole machine is large. For various problems, pharmaceutical companies must increase their investment in scientific research, integrate technologies from all sides, continuously improve the competitiveness of the crusher, and improve the accuracy and precision of equipment.

In addition, with energy conservation and environmental protection becoming a hot topic, ultrafine crusher companies should also strive to save energy, reduce emissions, and save energy and environmental protection, and produce products that are highly energy-efficient and environmentally-friendly. From the perspective of the future, whether it is from the economic transformation, improving the quality of development, or from the point of view of protecting the domestic environment, the energy-saving and environmental protection industry is one of the industries that will focus on future development, so it has also become a new investment project focused on by investors.

The crushing section is a process link that makes the particles smaller by means of impact, shearing, grinding, etc., and is one of the most important basic processes of a processing plant. The energy consumption of the crushing section accounts for 70% of the total energy consumption of the processing plant. Therefore, improving the crushing efficiency of the pulverizer can reduce the processing cost. Selecting the appropriate process and equipment to achieve the improvement of pulverization quality and efficiency is the key.

【Collection this page】 【Print this page】 【Close】