Rubber Liner Pump,Metal Liner Pump,Other Horizontal Slurry Pumps Sand Gravel Pump,Dredging Pumps Co., Ltd. , http://www.nspumpparts.com
truck mounted drilling rigs water well drilling rig in stock
 
Main features:
 C400CLCA truck mounted drilling rig is designed by our professional engineers with the world leading technology     concept; It is a kind of truck mounted and rotary drilling rig.
 The truck chassis adopts the 6X4 special crane chassis of brand SINOTRUK , the main transmit, transmission power, gearbox, sets of windlass, Mud Pump, Sewage Pump,mast are set up on the chassis.
This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2Amud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.
The power of drilling rig comes from the truck engine, the rig setups distribute implement and hydraulic system.
 We can upset the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
We can set up a generator (15kw) , so that it is convenient to illuminate or work at night.
 The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement.
 The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated.
The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.Â
Â
Technical Parameter
 Â
Â
Drilling depth(M)
80
400
Drilling diameter(mm)
1500
500
Speed of turntable(r/min)
21.2;36;63.2;100.6;155;20.2(reverse)
Torque of turntable(KN.m)
18;10.6;6;3.8;2.5;18.9(reverse)
Single rope lifting capacity of main windlass(KN)
45
The capacity of main windlass(KN)
270
Singlerope lifting capacity of hydraulic windlass(KN)
40
The capacity of hydraulic windlass(KN)
160
The lifting capacity of hook(KN)
270
Bearing capacity of mast (KN)
270
The height of mast (mm)
11500
Bearing capacity (t)
30
Pipe
Kelly bar(mm)
108×108×7500
Assistant pipe (mm)
89×10×5500
Hydraulic Pump
Model
CB-HP80/40
Pump delivery (ml/r)
80/40
Rated speed (r/min)
2000
Rated pressure(MPa)
20
BW850/2A
plunger pump
Diameter of cylinder (mm)
150
Stroke of piston (mm)
180
Theory of flow (L / min)
600 850
Rated pressure (Mpa)
3 2
Pounding times (min-1)
58 82
Diameter of suction tube (mm)
127
Diameter of drain pipe (mm)
64
Input speed (r / min)
470
Input power (kw)
40
Overall dimensions (mm)
2000*1030*1400
Weight (t)
1.5
Truck chassis
Model
TAZ5191TXJ
Drive form
6×4
Engine
Model
TBD226B-6II(Europe II emission standard)
Rated power(KW)
132
Speed(r/min)
2300
Size(L*W*H)(mm)
11110×2490×2500
Electric generator
Model
MF
Rated power (kw)
15
Rated voltage(v)
400
Rated current(A)
27
Speed (r/min)
1500
Frequency(Hz)
50
Protection level
IP21
Insulation Class
H
The best working gear (or speed)
5thgear(1000-1400r/min)
The highest speed(Km/h)
75
Weight(kg)
19340
Transport size(L*W*H)(mm)
12160*2490*3440
Working size(L*W*H)(mm)
11110*2490*13110
Â
Our Services
Delivery Time: Based on order quantity, normally it takes 30 days for production.Only 2 or 3 days if we have stock on your request size.
Quality Control: We have our professional QC and all the products will be strict inspection and testing for every order before shipping out.Â
After Services: Technical Support will be available in any time. We could provide the professional suggestion for you.
EX: 1.Select the right most suitable products.
    2. According to the rock types, choosing the face type, button tooth type.
    3. According to the different purpose,. choosing the different body typeÂ
Â
Our CompanyÂ
Â
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Â
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect. Â
truck mounted drilling rigs water well drilling rig in stock
Â
Main features:
 C400CLCA truck mounted drilling rig is designed by our professional engineers with the world leading technology     concept; It is a kind of truck mounted and rotary drilling rig.
 The truck chassis adopts the 6X4 special crane chassis of brand SINOTRUK , the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are set up on the chassis.
This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2Amud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.
The power of drilling rig comes from the truck engine, the rig setups distribute implement and hydraulic system.
 We can upset the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
We can set up a generator (15kw) , so that it is convenient to illuminate or work at night.
 The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement.
 The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated.
The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients.Â
Â
Technical Parameter
 Â
Â
Drilling depth(M)
80
400
Drilling diameter(mm)
1500
500
Speed of turntable(r/min)
21.2;36;63.2;100.6;155;20.2(reverse)
Torque of turntable(KN.m)
18;10.6;6;3.8;2.5;18.9(reverse)
Single rope lifting capacity of main windlass(KN)
45
The capacity of main windlass(KN)
270
Singlerope lifting capacity of hydraulic windlass(KN)
40
The capacity of hydraulic windlass(KN)
160
The lifting capacity of hook(KN)
270
Bearing capacity of mast (KN)
270
The height of mast (mm)
11500
Bearing capacity (t)
30
Pipe
Kelly bar(mm)
108×108×7500
Assistant pipe (mm)
89×10×5500
Hydraulic pump
Model
CB-HP80/40
Pump delivery (ml/r)
80/40
Rated speed (r/min)
2000
Rated pressure(MPa)
20
BW850/2A
plunger pump
Diameter of cylinder (mm)
150
Stroke of piston (mm)
180
Theory of flow (L / min)
600 850
Rated pressure (Mpa)
3 2
Pounding times (min-1)
58 82
Diameter of suction tube (mm)
127
Diameter of drain pipe (mm)
64
Input speed (r / min)
470
Input power (kw)
40
Overall dimensions (mm)
2000*1030*1400
Weight (t)
1.5
Truck chassis
Model
TAZ5191TXJ
Drive form
6×4
Engine
Model
TBD226B-6II(Europe II emission standard)
Rated power(KW)
132
Speed(r/min)
2300
Size(L*W*H)(mm)
11110×2490×2500
Electric generator
Model
MF
Rated power (kw)
15
Rated voltage(v)
400
Rated current(A)
27
Speed (r/min)
1500
Frequency(Hz)
50
Protection level
IP21
Insulation Class
H
The best working gear (or speed)
5thgear(1000-1400r/min)
The highest speed(Km/h)
75
Weight(kg)
19340
Transport size(L*W*H)(mm)
12160*2490*3440
Working size(L*W*H)(mm)
11110*2490*13110
Â
Our Services
Delivery Time: Based on order quantity, normally it takes 30 days for production.Only 2 or 3 days if we have stock on your request size.
Quality Control: We have our professional QC and all the products will be strict inspection and testing for every order before shipping out.Â
After Services: Technical Support will be available in any time. We could provide the professional suggestion for you.
EX: 1.Select the right most suitable products.
    2. According to the rock types, choosing the face type, button tooth type.
    3. According to the different purpose,. choosing the different body typeÂ
Â
Our CompanyÂ
Â
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Â
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect. Â
Model NO.: C400ZYII
Type: Truck Mounted Type
Hole Diameter: 120--1500(mm)
Hole Depth: 350(M)
Run of Rod: 3--4(M)
Drill Head Lifting Force(Kn): 130
Dimensions(L-W-H) Working: 9600*2950*7900(mm)
Transport Status (L-W-H): 10200*2470*3300(mm)
Supporting Form: Hydraulic Unit
Rig Mass: 12500(Kg)
Usage: Water Well
Power Type: Diesel
Trademark: GLORYTEK
Transport Package: Sea Worthy Packing.
Origin: Beijing, China
Model NO.: C400ZYII
Type: Truck Mounted Type
Hole Diameter: 120--1500(mm)
Hole Depth: 350(M)
Run of Rod: 3--4(M)
Drill Head Lifting Force(Kn): 130
Dimensions(L-W-H) Working: 9600*2950*7900(mm)
Transport Status (L-W-H): 10200*2470*3300(mm)
Supporting Form: Hydraulic Unit
Rig Mass: 12500(Kg)
Usage: Water Well
Power Type: Diesel
Trademark: GLORYTEK
Transport Package: Sea Worthy Packing.
Origin: Beijing, China