Description of Spray Dryer
Features of Spray Dryer
Technical parameter of Spray Dryer
CHANGZHOU
SULI DRYING EQUIPMENT CO.,LTD.specializing in the production of Mixing
Dryer, Spray Dryer, Granulation Dryer, Crushing Dryer, 3D Motion Mixer
and V-shaped Mixer.
Spray Dryer Spray Dryer,Special Spray Dryer,Garlic Spray Dryer,Protein Spray Dryer Changzhou Su Li drying equipment Co., Ltd. , http://www.sldrying.com
ZPG Spray Drier utilizes high-speed centrifugal atomizer to disperse the materials into tiny droplets, and fully contact with the hot air in order to complete constant dry and obtain the powder products. This centrifugal spray drying equipment is suitable for drying Chinese medicines and plant extracts with low melting point and high sugar content. It can prevent the materials from coking, caking or sticking to the wall. Our Spray Dryer meets the GMP standards.
1. This centrifugal spray dryer equipment has rapid drying speed, generally only needs a few seconds. It is characterized by instant drying.
2. The temperature of liquid drops is relatively low in drying process, so our spray dryer is especially suitable for drying thermosensitive materials.
3. The tower body and cyclone adopt automatic vibrating device, so as to prevent the accumulation of the material in the tower.
4. This Herbal Extract Spray Drier is equipped with interlayer cooling structure, which can effectively prevent the materials from sticking to the walls and coking phenomenon. The product quality and yield can be improved.
5. The special pneumatic conveying system can timely separate the finished products from the hot moist are in the system, so as to avoid moisture absorption or agglomeration of the finished products.
Model
ZPG-5
ZPG-10
ZPG-25
ZPG-50
ZPG-80
ZPG-100
ZPG-150
ZPG-200
ZPG-300
Water Evaporation (kg/h)
5
10
25
50
80
100
150
200
300
Handling Capacity (kg/h)
6 to 7
12 to14
25 to 34
50 to 68
80 to 108
100 to 135
150 to 203
200 to 270
300 to 406
Solid Content of Wet Material (%)
18 to 25
Finished Product Quantity (kg/h)
1 to 2
2 to 4
4.8 to 7.2
9.2 to 14
14.8 to 22.4
18.4 to 28
24 to 42
36.8 to 56.4
55 to 85
Moisture Content of Finished Product (%)
3 to 5
Electric Power (kw)
36
45
63
99
132
153
204
246
330
Heating Source
Steam + electricity
Product Recovery Method and Efficiency
Two-stage cyclone dust collector or one-stage cyclone dust collector and wet dust collector 95%
Automatic Instrument
Exhaust temperature indicator, self-adjusting controller
Inlet Air Temperature (ºC)
150 to 200
Outlet Air Temperature (ºC)
80 to 100
Dimensions (mm)
L
500
5500
7000
8000
9800
11000
12200
14000
15000
W
300
3500
4000
5000
5700
6200
7000
7800
9000
H
4500
4600
5000
6500
7600
8100
9000
9850
11100
According to reports, the mainland government will require local governments to stop providing subsidies or tax incentives to LED-related wafer and chip manufacturers. I do not know whether it is affected by this news, LED upstream chip makers Sanan Optoelectronics, Huacan Optoelectronics shares fell 0.7 and 1.4 respectively. So far, Sanan Optoelectronics did not receive official documents, but the future tightening of LED industry is a general trend. Wang Qingru, the director of Sanan Optoelectronics, said. Wu Yulin, president of the Foshan Lighting and Lighting Industry Association, also believes that the current import volume of domestic chip production equipment is too large. In fact, due to the support of local governments, the industry is expanding too fast. Data show that in the past 6-7 years, China invested 10 billion yuan in imported MOCVD equipment for LED chip production, of which local government subsidies accounted for 70. There is no impact on Dehao Runda. According to the introduction, the company completed the layout and investment of the production capacity before 2012. After that, the funds were transferred to the downstream channels and brands of NVC Lighting. The upstream government subsidies are mainly targeted at Chip production equipment MOCVD. Dehao Runda said in its 2014 annual report that on February 11 this year, the company's second extraordinary shareholders meeting passed the proposal to terminate the use of raised funds to implement LED epitaxial chip projects, and suspended the purchase of MOCVD equipment. Sanan Optoelectronics and Huacan Optoelectronics continue to increase production capacity. In January of this year, Huacan Optoelectronics announced that it started 154 billion chips production with 305 million yuan. In April, Sanan Optoelectronics established a subsidiary in Xiamen with a total investment of 10 billion yuan and 200 MOCVD. From the financial report, government subsidies are all Accounted for a large proportion of these manufacturers' revenue. Sanan Optoelectronics' 2013 annual report shows that the company received a total of about 458 million yuan of government subsidies, accounting for 44.21% of the net profit of the year; Huacan Optoelectronics received a net loss of 8.26 million yuan after subsidies of 135 million yuan; Dehao Runda before this year The government subsidies included in the current profit and loss in the third quarter (except for government subsidies that are closely related to the business of the enterprise, in accordance with the national unified standards), reached 110 million yuan. Wang Qing believes that the cancellation of financial subsidies has a greater impact on newcomers in the LED industry, and Sanan Optoelectronics has achieved certain industry status. Even if it has an impact, it is positive. Dehao Runda also believes that after the withdrawal of the subsidy policy, the industry will return to normal after the recovery of the industry next year, and the price of chips will be lifted, which is beneficial to business operations.