If the car breaks down, will you carry the car directly on the main road? I think many people will say this question: No. However, because the drivers on the road have mixed understanding of safety, some vicious car accidents that should have been avoided have occurred one after another. We have found a relevant video today. Apart from explaining the accident process, the most important thing is to remind drivers who are not very aware of safety. This is really dangerous! This is a video of a foreign car crash. Based on the speed of the vehicle in the opposite lane, this road may be similar to the Beijing loop. Due to the large traffic jam on the camera side, the driver's driving recorder just captured this tragic scene. A white car parked in the innermost lane of the opposite lane may be a problem with the vehicle, so he stopped on the main road. ◠At the 10th second of the video, the driver of the white car got out of the car and came in front of the car; ◠At the 17th second of the video, the driver of the white car hit the ground to check the condition of the vehicle; ◠At the 20th second of the video, a silver car at the rear bumped into a white car at a very high speed. I wonder if the owner of the white car could survive the accident. If he survived, the degree of injury must also be serious. . If we encounter such situations, what should we do? 1. Immediately turn on double flash warning light When there is a traffic accident such as rear-end collision, we must definitely get off the bus to check the damage of the vehicle, but before you get off the bus, you must remember to turn on the double-flash warning light to indicate the attention of the rear vehicle. After the vehicle has a problem or an accident with a social vehicle, the double flash will be turned on the first time. 2. Place a tripod After the double flash warning light is turned on, a warning triangle must be placed behind the vehicle. The correct placement distance is 50 meters for the general road, 100 meters for the expressway, and 150 meters for extreme weather such as rain, snow and fog. Only in this way can the rear vehicle notice you in a timely manner and protect yourself while also ensuring the safety of others. For their own safety as well as others, a triangle warning sign is placed after getting off the bus. In the rain, snow and fog weather, due to the reduced visibility, the distance between the warning triangles should be increased to 150 meters. 3. Push the vehicle to a safe area If there are no other social vehicles on the road, it is advisable to push the car into the emergency lane for rescue. If you continue to park on the main road, you will increase the risk factor of being rear-ended. On the premise of safety, pushing the car to the side of the road can prevent rear vehicles from following you. 4. After the car is parked in the emergency lane, the people in the car should get off Many people will sit in the car after they park in the emergency lane. This practice actually has a certain risk factor. Should a car with an emergency lane at the rear be behind you, the price to pay will be higher. . The correct approach is to park the car in the emergency lane. The people on the bus get off and stand near the vehicle waiting for the rescue. When the car is parked in the emergency lane, people in the car should get out of the car rather than continue to sit in the car. Editor's comment: The driver’s safety awareness in the video is really too bad. Perhaps he thinks it's okay to park the car here. Everybody can see the big car, but it’s because of his idea. This accident was created. I think the driver is definitely not hurt, and he certainly will not do similar things in the future. But why should we not regret waiting until it happened? Do you tell yourself that you will never do this next time? Maybe you have no chance in this life.
High precision double side surface grinding or fine grinding is a super finishing process performed by removing material from two surfaces of a component resulting in extremely precise geometric accuracy and surface finish. Typically, it is the last grinding step of a mechanical production chain utilized to improve and/or correct the geometry of parts coming from sintering, sawing, molding or similar operations. Depending on the application, the stock removal also can be taken from just one surface.
GMM1200 Double Side Surface Grinding Machine Disc Grinder,High Precision Surface Grinding Machine,Precision Surface Grinder,Oil Nozzle Surface Grinding Machine Xinxiang SKF machinery Co., Ltd. , https://www.facegrindingmachine.com
