Introduction: What standards should PM2.5 use for monitoring when the new air quality standard is still not in place? The huge market created by the regulatory monitoring equipment has caused concern in the industry. The reporter learned that nine kinds of monitoring equipment, including the United States, Germany, and China, are being tested by the Ministry of Environmental Protection. In Guangdong, the financial needs to support 100 million yuan to meet the province's 97 monitoring sites all have PM2.5 monitoring capabilities.

The total cost of the Guangzhou Environmental Measurement Center exceeded 20 million. The reporter learned that in the current market of known PM2.5 monitoring equipment, the products of the Thermo Fisher Scientific Company are common, and the price of a single device is as high as 280,000 yuan. RMB. Of the monitoring stations known to have PM2.5 monitoring capabilities in Guangdong, almost all of the company's products have been selected. Among them, the Guangzhou City Environmental Monitoring Center Station at Jixiang Road is responsible for the PM2.5 monitoring data collection and analysis instrument, which is precisely the company's products, plus the supporting US-imported facilities, and the total cost of the site is over 20 million yuan. Over 90 air quality indicators can be monitored, including even PM1 parameters. The remaining 9 national monitoring sites in Guangzhou use the same equipment as this super station. The Guangdong Provincial Environmental Monitoring Center is located in the environmental protection building in Moubasha, Haizhu District. The monitoring equipment for PM1 and PM2.5 is also from the company.

Why Guangdong Environmental Protection Department is so fond of American products? A person in charge said that Thermo Fisher's products have passed the certification of the US Environmental Protection Agency. It is currently the most authoritative instrument before China's relevant standards have been introduced. Its use of beta ray monitoring PM2.5 methods is precisely related to the national air quality. The criteria in the second draft of the new specification are the same. While similar products in China, although accuracy is not a problem, and the cost is only about half that of American products, the stability remains to be tested.

The potential market for air monitoring in Guangdong is as high as 100 million yuan. It is understood that air quality monitoring stations with PM2.5 monitoring capabilities are expensive and require several million yuan at any time. At present, there are a total of 97 national air quality monitoring sites in the province, of which all monitoring sites in Guangzhou and Shenzhen already have all six (according to the requirements of the national new regulations request draft, new ozone, PM2.5 and other indicators) monitoring Capability; Dongguan and Foshan have 5 and 8 national control points respectively, and Jiangmen, Zhaoqing, Huizhou and Zhongshan each have one or two monitoring points basically capable of monitoring new pollutants. In cities other than the PRD, monitoring of PM2.5 and ozone is basically a blank.

According to a conservative estimate, to ensure that 97 of the province's national control points have the capacity to monitor new pollutants, the financial sector needs a matching investment of 100 million yuan, and equipment procurement has become the focus of attention. At present, Jiangmen and other places have already carried out related work on purchasing monitoring instruments.

Filter End Caps

The filter end caps have a variety of end cap types such as Dust Collector Filter End Caps, dust filter element cover, activated carbon filter element cover, oil filter element end caps, air filter element end caps, water filter element end caps, etc.
At the same time, it can also be divided into square filter end caps, round filter end caps, Open Round Filter End Caps, special-shaped filter end caps, and other types;
According to the material, it can be divided into galvanized filter end caps, aluminum filter end caps, stainless steel filter end caps, and anti-fingerprint filter end caps. etc.
If you don't know this aspect, don't worry, you just need to tell us your use environment and its requirements, and our professional team can make a recommendation that is most suitable for you.

Metal Filter End Caps 1


FAQ

Q1: Are you a factory?
A1: Yes, we are a professional manufacturer of wire mesh products focusing on wire mesh for decades.

Q2: How can I get a quotation?
A2: You need to provide material, sheet size, wire diameter, hole distance, and quantity for inquiry. Special requirements can also be specified.

Q3: Is it ok if I want free samples?
A3: Yes, we can provide free samples in 20cm-50cm sizes along with our catalog. But the express fee will be on your account. If you place an order, we will refund the courier fee.

Q4: What's your payment term?
A4: Generally, our payment terms are T/T 30% advance payment, balance 70% against copy of B/L. We can also discuss other payment terms.

Q5: How about your delivery time?
A5: 1. We always prepare enough stock materials for your urgent needs, and the lead time for all stock materials is 7 days.
Depending on quantity and technology, exact lead times and production schedules for non-stock items will be communicated to you.

Filter End Caps,Dust Collector Filter End Caps,Filter End Caps For Dust Collector,Open Round Filter End Caps

Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com