The National IV Dongfeng Ruiling Medical Waste Transfer Vehicle, the National IV emission standard, adopts the Dongfeng Ruiling Class II cargo carrier, model DFA1041SJ35D6. The engine uses the D28D10-4DA, 75-power/102-hp diesel engine produced by Dongfeng Light Engine Co., Ltd. Cab with rollover, single row cab, cab with direction assistance, clutch booster, front axle 2 tons, rear axle 4 tons, wheelbase 3300, tire 7.00R16 wire tire. Body introduction: the body is fully enclosed, the back door is a double sealed structure (set the double back door and the inner door two doors, a gas spring is set on the inner door to facilitate the opening of the inner door up and down) to ensure that the inside of the box is filled with rubbish The partition of medical treatment and the outside world also facilitates the loading and unloading of goods. The stainless steel plate inside the body is used for the inside wall, and the corrosive disinfectant is resistant to acids and alkalis. Arc stainless steel and corners are arranged around the inside of the compartment. There is no clear corner for disinfection and cleaning. . L-type compartment: The medical waste transfer car compartment is divided into the cargo loading compartment and the medical article storage compartment. A single-side door is set outside the medical article storage compartment (the assistant driver) to facilitate the storage of medical and medical equipment to ensure the safe storage of medical waste. And the personal safety of staff. Automatic spraying device (optional): The medical waste transfer body can be equipped with an automatic spraying device. The automatic spraying control system is set in the cab or in the compartment where the medical device is placed, for the type of the disinfecting solution and the spraying time. The requirements of the spray time setting adjustment (10S-5min), the use of automatic spraying device, spraying the disinfectant can quickly kill a variety of microbial bacteria in the cabin, so that transport and handling more secure and reliable. Contact Tel 0722-3821899 Contact, Zhou Zhongxing http:// Http :// WWW . HBCL99 . COM Sales Hotline: 15897596858 Grinding mills are machines used to break solid materials into smaller pieces by grinding, crushing, or cutting. They are commonly used in the mining, construction, and chemical industries to reduce the size of materials such as rocks, minerals, or grains. Grinding Mills,Ball Mill Grinding,Ball Mill Equipment,Slag Ball Mill Shenyang North Heavy Metallurgical Engineering Technology Co., Ltd. , https://www.nhmetallurgy.com
Office Phone: 0722-3821899
E-mail:
There are various types of grinding mills, each designed for specific applications. Some common types include:
1. Ball mills: These mills use balls made of steel or other materials to grind the material. The balls are placed inside a rotating drum, which causes them to collide with the material, resulting in size reduction.
2. Rod mills: Similar to ball mills, rod mills also use rods instead of balls for grinding. The rods are placed inside a rotating drum and tumble the material, breaking it down into smaller pieces.
3. Vertical roller mills: These mills have a vertical orientation and use rollers to grind the material. They are often used in cement and mining industries.
Grinding mills can be powered by electricity, diesel, or gas engines. They can also be operated manually in smaller-scale operations. The choice of grinding mill depends on factors such as the material being processed, desired particle size, and production capacity.