Resistance Tube Band Sets,Resistance Tube Band,Resistance Tube Workout,Resistance Tube Set,resistance bands wholesale Nantong Yuan International Trade Co.,Ltd , https://www.yuantianwey.com
2. Choose fair passages. In all engine operating conditions, low speed and heavy load are the most fuel-efficient. When driving on urban roads, cars are often crowded and often require starting parking, which consumes a lot of fuel. Therefore, before each trip, drivers should formulate a good driving plan to understand the situation of the roads they have passed, and try to avoid rushing through busy roads during traffic peak hours so as to avoid traffic jams and fuel and time. Even if you are driving on a section of road that you know, you should always listen to traffic reports on the traffic station to understand the latest traffic information and keep the traffic smooth.
3, accurate refueling. Refueling a car is not a matter of raising the label. The higher the product model is, the better the product will be. If the product model is too high or too low, it will result in insufficient combustion. Instead, the fuel consumption will be high, and even the engine will not function smoothly. This will severely damage the engine. Ideas and other important parts. In addition, if convenient, do not add too much fuel, increasing the car's own weight, will increase fuel consumption, timing of refueling in the early hours, the oil quality is relatively good.
4, to maintain normal tire pressure levels. Lack of tire pressure, dynamic resistance will greatly increase, tire shift or excessive wear may also increase fuel consumption. Therefore, it is advisable to check the tire pressure once a month and change the tires as needed. In addition, radial tires are used, which are 6% to 8% higher than ordinary bias tires.
5, accurate shifts. Do not run the engine at an unnecessarily high speed while driving. It should be hung as high as possible. Only when the engine is running unsuccessfully, hang it into the low gear. When a car equipped with an automatic transmission is accelerating, the accelerator pedal should be slowly decelerated, and the gearbox should be selected for an economic shift program, which should be advanced into a high gear and lagged into a low gear in order to reduce fuel consumption. When parking or decelerating, use the inertia of the vehicle as much as possible to achieve the purpose of fuel economy.
6. Maintain proper driving speed. Each vehicle has its own economic speed, and it is the most fuel-efficient to maintain the economic speed around the hourly speed. In general, the car is the most fuel-efficient when the speed is 70 to 90 kilometers. When the speed is high, the car's resistance is greatly increased. According to statistics, the speed increases to 110 to 120 kilometers per hour will increase by 25%.
7. Keep the vehicle low wind resistance. At high speeds, a large part of the power is used to overcome wind resistance. Therefore, try not to load on the roof, or make modifications. It is estimated that adding a luggage rack on the roof will increase fuel consumption by 5%. In the high-speed state, do not think that opening the window will be more fuel-efficient than opening the air-conditioner. Opening the window will greatly increase air resistance, and it will be even more costly. Should clean up unnecessary things in the car, reduce the weight of the car.
8, as far as possible to avoid emergency hurry up. The soft, smooth driving style is the most fuel-efficient. In the initial stage, you should avoid slamming the gas pedal as far as possible. The exact method is smooth acceleration. After reaching a certain speed, you should keep driving as evenly as possible. When driving on a crowded road, you must also look at the road ahead to avoid sudden braking. This not only saves fuel but also extends the life of the vehicle.
9, to avoid the engine idle for a long time. The fuel consumption of idle engine speed at idle is far longer than normal driving. Therefore, it is better to turn off the engine when parking for a long time. For example, it is better to turn off the engine when parking. In the cold start, the temperature should not exceed 1 minute, and keep for a few minutes at low speed. You can.
10, to strengthen the maintenance of the car. The adjustment and maintenance of the car affected the engine performance and car resistance. According to statistics, the fuel consumption of the poorly maintained engine will increase by 10% to 20%. The owner of the vehicle shall make regular maintenance to the auto repair factory, such as checking the tire pressure, four-wheel alignment, adjusting the brake friction plate and the brake drum clearance, and oiling the lubrication points on the chassis of the car, changing the oil regularly, and inspecting the filters. In addition, the oil in the model specified in the bill, choose the smallest viscosity, because the greater the viscosity, the greater the friction and increase fuel consumption.
1. Do not blindly use power-consuming equipment. Please use the power-consumption equipment according to actual needs, and do not use it blindly to increase fuel consumption. Rear window heaters, auxiliary headlights, blowers and air-conditioning systems all have a large amount of electricity, which increases generator load and improves fuel consumption. For example, if the rear window heater is used for 10 hours, the overall vehicle fuel consumption will increase by 1.0 liter.