Model NO.: VOS-30A
Vacuum Degree: About 133PA
Time Achieving The Highest Temperature: About 90 Min.
Heating Power: 1250W
Effective Volume: 30L
Partition Number: Two Layers
Temperature Control Method: Fuzzy Logistic Pid Control
Voltage: 110/220V ±10%, 50/60Hz
Internal Size W*D*H/Mm: W310*D310*H320
External Size W*D*H/Mm: W500*D450*H745
Structure: Oven
Appearance of Dried Sample: Bulk
Type of Atomization: Pressure Atomization
Sprayer: Pressure-Type
Trademark: STIK
Specification: CE, ISO, SGS
Origin: China
It can be used for reduce the water content in materials instantly based on the feature of high temperature and low pressure.
Perfect Functions:
1. Door structure:Special safety glass with flexible suspended doorframe spring structure to guarantee the tightness during the test.
2. Heating :Four-side heating of inner bag to make temperature rise faster and evener. The scientific installation of senor can guarantee the actual temperature at geometrical center of the incubator.
3. Independently adjustable temperature safety device :Temperature safety device can be adjusted according to demand to protect the system in two ways, thus to increase the safety coefficient.
4. Pipe interface :Vacuum interface diameter of 18mm or G1/4 pipe interface; vacuum hose (elastic) is provided to facilitate the use and improve the tightness.
5. Easy for placement (optional) :as an option, it is easy for the placement and movement of incubator.
6. Inner structure :Special door sealing structure is applied. SUS304 stainless plate with the thickness of 5mm makes the inner bag level, beautiful and safe. The opening of inner bag is processed with precise gantry cutting to guarantee the levelness, achieve the best tightness and keep a long term vacuum degree.
Main Advantages: 
1,The incubator body is made with high quality cold rolling plate numerical control technology and is sprayed with customerized Dupont powder to make the appearance more beautiful.
2,Special door sealing structure: SUS304 stainless plate with the thickness of 5mm makes the inner bag level, beautiful and safe. The opening of inner bag is processed with precise gantry cutting to guarantee the levelness, achieve the best tightness and keep a long term vacuum degree.
3,The most advanced heat insulating technology and insulating material are applied to keep the temperature inside incubator unchanged for a long time and realize the purpose of energy conservation.
4,Imported control system, sensor, sealing ring and vacuum gauge, etc. are applied.
5,A vacuum system comprising high quality red copper and copper pipe joint is applied to make sure no vacuum leakage within 48 hours after the vacuum pump and valve are shut down 
6,Four-side heating of inner bag to make temperature rise faster and evener. The scientific installation of senor can guarantee the actual temperature at geometrical center of the incubator.
7,The most advanced fuzzy PID control programmable multi-mode temperature control method and LCD are applied.
8,Over temperature protector and creepage protector are equipped to guarantee the operating safety.


SUS304 CE Mark 30L Laboratory Vacuum Drying Oven (VOS-30A)
SUS304 CE Mark 30L Laboratory Vacuum Drying Oven (VOS-30A)
SUS304 CE Mark 30L Laboratory Vacuum Drying Oven (VOS-30A)

Model VOS-15A VOS-30A VOS-60A VOS-90A
Heating method Plate radiation type four-side heating
Temperature range RT+5~210(250 to the utmost) RT+5~210
Vacuum degree About 133Pa
Temperature display accuracy 1
Humidity control accuracy ±1(100)
Time achieving the highest temperature About 90 min.
Temperature control method Fuzzy logistic  PID control
Temperature sensor PT100 three-core high precision sensor (Honeywell)
Heating power 800W 1250W 1800W 2200W
Vacuum gauge A series mechanical vacuum gauge  B series self-selection vacuum gauge (Vacuum adjustable)
Inner bag Cold rolling stainless plate (SUS304)5mm super thick
Inner dimension (mm) W250*D250*H250 W310*D310*H320 W400*D380*H400 W450*D450*H450
Overall dimension (mm) W400*D405*H625 W500*D450*H745 W590*D530*H860 W620*D610*H925
Effective volume 15L 30L 60L 90L
Partition number Two layers Two layers Two layers Two layers
Intake 18mm vacuum interface diameter, 18mm cleaning interface diameter or G1/4 pipe joint connection
Power voltage AC-220V±10%50/60HZ
Weight About 50KG About 70KG About 110KG About 130KG

Stationery Moulds

Stationery Moulds,Painting Tin Metal Can Mould Die,Spray Painted Tin Metal Box Mold,Painting Acrylic Tin Can Box Molds

gstarstationery , https://www.nbpencilmaking.com