Model NO.: STW
Advantage: Simple Structure
Condition: New
Suitable Material: Q235,Q345,G550 for Gi,PPGI,Gl,PPGL
Suitable Thickness: 0.4mm~0.7mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile,Roof Tile,Corrugated Sheet,Purlin
Main Motor Power: 3kw
Control System: Mitsibishi PLC
Forming Speed: 15m/Min
Trademark: STW
Transport Package: Sea Package
Specification: CE
Origin: China Mainland
HS Code: 8845210
Professional Expert Manufacturer of roof sheet making machine
STWYX15-225-900
No.       item Parameter(all is subject to our final design)
1
 		 Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity Max.5tons
3 Forming speed(m/min) About 18-20m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around19-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons

Components:
- The uncoiler and its base
- Coil sheet guiding and adjusting equipment
- Film covered device
- Main roll forming system
- Post- Cutting device
- Hydraulic station
- PLC control System
- Support table


Material of Roll former system:
- Roller: High grade No. 45 forged steel, plated hard chromed on the surface of rollers with thickness 0.05mm.
- Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm.
- Cutting blade: Cr12 mould steel with quenched treatment.

Working flow:
Decoiling the sheet- - - Guiding the sheet- - - Covering the film- - - Roll forming- - - Measuring the length- - - Cutting the panel- - - Panels to the supporter.

Our machine's warranty time:
We offer 12 months quality grantee time starting from the date of delivery. When delivery, we will ship a set of wearing parts for free; Within the warranty period, maintenance of equipments and replacement of parts of equipment are charge-free.


After-sale service:
We offer sale after service for life. The machine will be inspected well in our workshop before delivery. We will send one technician to your factory to install the machine if you need extra installation, training service; The seller should arrange offer technical back-up and assign a technician people to the buyer's part.
No.       item Parameter(all is subject to our final design)
1
 		 Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity Max.5tons
3 Forming speed(m/min) About 18-20m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around19-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons

LED Product Machine

1.Vertical mold-shut and Vertical injection,apply to enchase molding.

2.2 barrer temperature control zones.Lndependent settings for screw speed,injection pressure,and back pressure assire excellent REPEA-TABILITY and precise contro.

3.Stationary lower half with hydraulic ejection assures a vibration free work area.

4.Low pressure control standard.

5.Material pipe can be elevated.

6.The special oil road design,model the efficiency to raise 30% above.

LED Product Machine,Production line Led,Led Injection Moulding Machine,Led Machine

Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.zanyangmachine.com