Electrolyte system: Electrolyte circulation system with 2-stage filtration, adjustable line pressure. CNC system: The first level is a personal computer. The automatic programming system installed can automatically generate the NC program list for the whole impeller machining according to the original data of the parts. The CNC machining program can be generated by the serial interface to the CNC of the machine tool. unit. Processing cathode: internal spray welding structure, S0 type liquid outlet tank. Fixing indexing: Positioning with the technical pin hole on the bottom surface, inner hole and bottom surface of the part, the screw pressing plate is pressed tightly, and the indexing of the table can be rotated by the machine tool, or the indexing hole on the bottom plate can be positioned by the clamp. The bolt indexing can avoid the influence of the machine table backlash on the machining accuracy. Processing parameters (1) Processing object: the guide vane channel between the wind deflector, the material is 1Cr18Ni9Ti; (2) electrolyte: 10% NaCl, pressure 0.5MPa, temperature 30-40e; (3) initial surface clearance: 0.5mm; 4) Vertical feed rate: 0.75 mm/min. (Finish) Round Trash Can,Satin Finish Bin,Round Shape Bin,Satin Finish Can Evergreen Houseware , https://www.jmelectricalappliance.com