Prospecting rights transfer or favored

The Ministry of Land and Resources issued an announcement on February 10 this year stating that in order to protect and promote the healthy and sustainable development of the coal industry in our country and to prevent excess investment in coal resources exploration and overcapacity, it will continue to be held nationwide before December 31, 2013. Suspend the application for new coal exploration rights. This is the third time the Ministry of Homeland has cooled coal exploration since February 2007.

Data show that in 2010 China's coal industry completed 377 billion yuan in investment in fixed assets, an increase of 37%. The total amount of investment completed in the "Eleventh Five-Year Plan" is roughly close to 1.2 trillion yuan, more than twice the amount achieved in the first 55 years since the founding of the People's Republic of China. The approval of the control of coal exploration rights will help control coal development from the source. However, for coal companies, to obtain new prospecting rights and expand the scale of development, we can only rely on the circulation of deposits. Industry sources said that this may make the flow of prospecting rights favorable.

The area covered by the census of the Inner Mongolia Coal Mine for this transfer is 77.39 square kilometers. The mining area is easily accessible and the railway station is 20 kilometers away from the mining area. The mining area around the mining area is barrier-free and can continuously expand the area of ​​the mining area. The mining area belongs to the area where the country uses coal to replace wood and natural forests. The pit coal price is 380 yuan per ton. The transfer rate of prospecting rights is 100% and the transfer price is negotiable.

The original prospector had drilled eight boreholes in 2009, among which there were four coal drill holes, see the first layer of the coal seam. The coal seam has a total thickness of 0.64 to 2.09 m. The structure is simple. There are 2-3 layers of rock and the thickness is between 0.47 and 2.29 m. There is a coal seam with a hole, a thickness of 0.90 m and a depth of 11.22-89.77 m.

The coal seam in this area is a long-flame coal with good coal quality, low sulfur content, low phosphorus content, and a calorific value above 5,900 kcal. The heat of the coal seam gradually increased from shallow to deep, and the volatile matter yield gradually decreased and the degree of metamorphism increased. The raw coal moisture is between 4.45-4.90%, the ash content is between 26.82-35.45%, the volatile content is between 47.8-50.01%, the sulfur content is between 0.84-1.13%, and the phosphorus content is between 0.015-0.032%. The heat Qnet.d is between 19.57-22.99MJ/kg, which can be used as civil fuel, dynamic power generation and so on.

Due to the large area of ​​the mining area, only eight boreholes were drilled in the middle. Although there were coal points in both the north and south areas, drilling control was not carried out. The amount of this resource was only estimated within the control range, according to the survey specifications. Using the estimated indicators, the thickness is 0.8 meters, the bulk density is 1.3, and the ash content is less than 40%. A total of 8.909 million tons of coal resources were obtained. The listing announcement stated that the mine area is large and more drilling work is needed before the reserves can be ascertained.

Should prevent integration risks

People in the industry believe that although the suspension of coal prospecting rights may bring about the transfer of fire exploration rights, coal mine prospecting investors should make a full assessment of the risks brought about by the integration of coal resources being rolled out across the country.

Due to the serious problems in the exploration, development, and transfer of mining industry in China in recent years, the 12 ministries and commissions jointly issued the “Notice on Further Promoting the Integration and Development of Mineral Resources” in 2009. In response to the exploration right, the “Notice” stipulates that “in principle, Only one main body is set in the mining area. For multiple exploration rights in the same mining area, the exploration right shall be integrated into a mining subject when the mining right is transferred to the mining rights,” actively creating conditions to implement the integration exploration, exploration and development integration, and overall planning and geological search. Mine and mineral development, and efforts to promote the integration of exploration and development." Local governments have also formulated local coal resource integration plans under this policy framework.

Not only that, the exploration and development of the coal field mining area will also be based on the “Twelfth Five-Year Plan”. It is understood that the number of coal fields reported by various localities that wish to be included in the plan is several times the number of coal fields finally included in the national plan. The approval of relevant departments mainly depends on the “11th Five-Year Plan” which identifies the coalfield project exploration, how to divide the mining area, and the exploration targets; the “Twelfth Five-Year Plan” is based on the exploration progress of the projects in the “Eleventh Five-Year Plan”. Formulate a master plan for the development and production of mines. In other words, the inclusion of two plans, especially the “Twelfth Five-Year Plan” prospecting rights, has investment value.

Rebar Cutting Machine

Rebar shear is the ideal solution for cutting all ferrous waste materials and in particular for reducing the volume of steel and various metals. Equipped with 4-edge blades driven by a special hardened steel hydraulic cylinder that allows high productivity at low costs, the alligator shears are also provided with a special geometry designed to always develop, in all work phases, the maximum cutting force. Characterized by numerous innovative elements that make them unique, the crocodile shears are the result of meticulous and careful research and development that the company reserves for each of its products, with a view to an ever-increasing attention to the customer.

Rebar Shear, Rebar Shearing Machine, Steel Rebar Shear, Steel Bar Shear, Bar Shear

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com