• Model NO.: SLA SERIES
  • Connection Form: Thread
  • Material: Brass & Stainless Steel
  • Valve Structure: Pilot Piston Structure
  • Usage: Flow Control
  • Application: Industrial Usage, Water Industrial Usage, Household Usage
  • Valve: Teflon
  • Steam Solenoid Valve: 15~50mm
  • Specification: ISO & TUV & CE
  • HS Code: 8481804090
  • Actuator: Electric
  • Type: Pilot Operated
  • Pressure: High Temperature
  • Power Supply: AC or DC Solenoid Valve
  • Standard: DIN
  • Solenoid Valve: 3/8′′~2′′ Flange
  • Steam Valve: 0.5~10bar
  • Trademark: SANLIXIN
  • Origin: Yuyao, Zhejiang, China

Solenoid Valve (SLA)

PRODUCTS
SLA Brass Series. 2/2-way Piston Solenoid Valve. Normally Open
Body Material: Forged Brass
Orifice: 15mm~40mm
Pipe Connection: 3/8"~1/2"
Fluid Media: Steam\Water\Hot Water\Air\Oil etc.


SOLENOID VALVE
2 WAY 1/8 TO 1 INCH,
HIGH PRESSURE UP TO 100BAR
24VDC 220VAC 380VAC



SOLENOID VALVE
2-Way normally closed solenoid valve;
Closed when de-energized, open when energized.
Body material: Brass, and stainless steel,
Voltage: 220VAC /230VAC/380VAC/50/60HZ 24VDC;
Voltage Tolerance: +10% to -10% applicable voltage;
Ambient Temp. 0 ~65 Fluids Temp 0 ~110
Flow as the arrow. Mounts in any position; Best position is
Solenoid vertical and upright diriction.
Serialized products. Small in size. Large flow rate. Widely use. L.
Coil can fix Germany Nass Coil.

Yuyao Sanlixin Solenoid Valve Co., Ltd specializes in designing and manufacturing all kinds of fluid solenoid valves.
Our solenoid valve have direct acting type, pilot operated type, piston types
The body can be made of brass, stainless steel, plastic, Teflon and aluminum and the seals can be made of NBR, EPDM, viton, Teflon, PTFE silicon
The valve size can be DN1.00mm to DN150mm; Media can be water, hot water, gas, air, steam. Light oil, weak acid& alkali fluids etc.
So our solenoid valves are suitable for all the general purpose equipment.
New  Pipe Orifice Pressure Seals Body
Model code Size (mm) (bar) Material
SLA2WH02T1C15 3/8 15 0.5~8 TEFLON Forged brass
SLA2WH02T1D15 1/2 15 0.5~8 TEFLON Forged brass
SLA2WH02T1E20 3/4 20 0.5~8 TEFLON Forged brass
SLA2WH02T1G25 1 25 0.5~8 TEFLON Forged brass
SLA2WH02T1H35 11/4 35 0.5~8 TEFLON Forged brass
SLA2WH02T1J35 11/2 35(40) 0.5~8 TEFLON Forged brass
SLA2WH02T1K50 2 50 0.5~10 TEFLON Forged brass

Anchorage Frame

An anchorage frame secures the Tower Crane mast to a structure or framework and provides stability when the tower crane is under load or experiencing wind forces. The number of Tower Crane Anchorage Frame is calculated by taking into account such factors as the type of tower cranes, jib length, height under hook, and maximum out-of-service wind speed.


Jacking Part Anchorage Frame,Tower Crane Anchorage Frame,Mast Section Anchorage Frame,Anchorage Frame For Tower Crane,Tower Crane Anchor

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com