Natural Cooling Hanging Type Electromagnetic Separator Series Rcdb-3

• Model NO.: RCDB-3
• Voltage: 220V
• Material: Casting Steel
• Certification: ISO9001:2008, ISO9001:2000
• Warranty: 2 Years
• Customized: Customized
• Installation: Hanging or Frame Fixing
• Wire Winding Material: Aluminum or Copper
• Rated Voltage: DC-220V/110V
• Working Temperature: Below 200 Degree
• Hanging Height: 75 mm
• Trademark: ZN-Magnet
• Specification: Magnetic Separator
• HS Code: 84741000

• Type: Magnetic Separator
• Weight: <1T
• Material Feature: Oil Resistant
• Energy Saving: Energy Saving
• Color: Red
• Condition: New
• Shape: Circular/Round
• Usage: Ferror Material Removing
• Insulation Degree: H
• Suiting Belt Width: 300 mm
• Diameter: 400 mm
• Transport Package: Ply-Wooden Box
• Origin: China

Note:
1. We advise you to use alternate separators and excitant them intermittently, so they can remain a cold-state working situation and thus have a strong and stable attraction force. The control circuit that adopts PLC program control is flexible and can not only discharge iron regularly but also has sound & light alarm.
2. Measuring equipment of coil temperature can be supplied to meet customers' requirement. So does weighing equipment, which can discharge over-weight iron first and give out alarm at the same time.

PART II: WHAT IS SEPARATOR
The magnetic separator consists of a large rotating drum that creates a magnetic field. Materials enter the separator and fall out through mesh at the base if they are not magnetic. Sensitive particles respond to the magnetism and cling to the sides of the container. The drums can be used in continuous processing of materials as they move along the assembly line, or in batch jobs, where a single batch is run through all at once.
One common use for magnetic separation is to remove unwanted metal from a shipment of goods. Magnetic separation can help companies keep materials pure, as well as remove things like nails and staples that may have crept into a shipment. The equipment can also purify ores, separate components for recycling, and perform a variety of other tasks where metals need to be separated or isolated. Equipment can range in size from a desktop unit for a lab that needs to process small amounts of material to huge drums used in scrap metal recycling centers.
 
Series RCDB, also named PDC disc type electromagnetic separator, is used for removing iron from powdery or lumpy nonmagnetic material.

1. Magnetic circuit adopts computer simulation design, so it has a deep penetration strong magnetic force and high field gradient and can provide max attracting force.
2. The shell is welded by sealed steel plate and has gone through a strict test of air-proof. Meanwhile, a vacuum filling epoxy resin has been added between coil and shell to enable the equipment work well even in harsh working conditions.
3. Natural cooling mode is adopted which causes a less risk of fault occur.
4. All tech data meet the standard JB/T7689-2004 and some are even beyond the national standard. The product can remove 0.1~35 kg materials from non-magnetic materials and the removing rate can up to 95% or more.

PART III: Installation Indication
 
 As you could see from the above picture, there has two installation ways for the separator: on the head or on the middle of conveyor.
 
But no matter you install on which part of the conveyor, you need to make sure:

1. The separator is on the right top of conveyor
2. The separator should be straightly vertical of conveyor
3. Make sure there has lifting point on the top of conveyor, we could provide you adjustable lifting chain. Or you could have a frame to fix the separator above the conveyor.
4. This type of separator is of manual discharging type, you need to remove the iron parts attached on separator by workers with non-magnetic Scraper Plate.
5. You could check and confirm if you in need Non-magnetic Roll or not.
6. For the manual discharging type, you could also need to check with your customer if you need travelling car or not.

PART IV: Separator Usage

PART V: Package
Ply-wooden Board Box with Iron Frame Inside


PART VI: Our Service
Quick Response:
Enquires by email, fax or instant message is high appreciated.
Your enquiry will be replied by email & fax within 24 hours.
Please feel free to call us at any time for any questions or documents wanted.
 
Pre-sales Service:
All of our technical proposal will be offered by our senior engineers, based on your request.
Full production process will be shown to you by photos & video during manufacturing.
 
Package & Transportation:
Package: Ply-wooden Box, with fixed iron frame inside.
All available shipping ways could be applied, by courier, air or sea.
Appointed shipping company or our own forwarders all could be used in shipment.
Full-way tracking the cargos for you till the goods arrive.
 
After-sales Service:
After sales service and technical support could be offered within guarantee period, Site maintenance could be also provided.
 
 
NEVER HESITATE TO CONTACT ME:
Yueyang Zhong Nan Electromanet Technological Co., Ltd
www.zn-magnet.com

Metal Plate

Metal Plate,Steel Checker Plate,Blank Metal Plates,Stainless Steel Sheet

Suzhou Gold ant Precision Sheet Metal Co.,Ltd , https://www.sgpsheetmetal.com