Cutting Unit,Die Cutting Unit,Rotary Die Cut Cutting Unit,High-Precision Cutting Unit Jetfly High Precision Manufacturing Co.,Ltd , https://www.jetflytech.com
    Replace the pump material As the traditional material pump operation loss too much, some Western countries to replace the pump material to improve pump efficiency, which the United States Sym hybrid pump is more effective. The seawater and acid-base medium with superior corrosion resistance, is a structural composite material, fully machined by the CNC machine tools, all of the composite manufacturing is structural. The unique graphite-based phenolic-resin-reinforced composite fibers are intertwined bidirectionally or three-directionally and the reinforcing fibers are continuously continuous for the purpose of obtaining high strength and elasticity; a phenolic epoxy resin mixed thermosetting resin matrix , This resin shows excellent mechanical properties and good chemical resistance; Hilstre is a continuous woven graphite fiber, glass fiber and synthetic fiber, fiber all continuous, three-dimensional weave, suitable for such as water pump impeller high strength Application, there is a significant improvement in the efficiency of the pump.
    Pump at different flow rates and import and export pressure, the efficiency is changing, the general factory instructions in the working curve. Pump efficiency should be stable under constant conditions. However, when the pump is lower than the rated flow, increasing the inverter can reduce the motor power consumption and improve efficiency. Because the process of regulating the flow, the general is to reduce the outlet flow area, through the throttle effect, increase the water outlet resistance, reduce flow, there will be an irreversible throttling loss; and the inverter is to change the motor speed, lower water flow, water Export resistance changed little. Polymer composite materials used in the pump during the work, the pump flow through the water flow and the pump impeller surface friction and the impact of water itself, the energy consumed by the pump is mainly used to resist the flow of water on the surface friction and Eddy current resistance. The energy (water head loss) that water consumes during the flow is used to overcome internal friction and the friction between the water and the equipment interface. If the pump, impeller surface smooth (this surface is called hydraulic smooth surface) surface resistance is small, energy consumption is small.
    Spraying the polymer composite on the pump overcurrent and impellers to form a hydraulically smooth surface, the smooth surface finish is 20 times that of polished stainless steel, an extremely smooth surface that reduces the amount of fluid in the pump Layered, thereby reducing turbulence within the pump, reducing the pump volume loss and hydraulic losses, reducing power consumption. To reduce the loss of flow resistance purposes, thereby increasing the water pump efficiency, but also to some extent also improve the mechanical efficiency and volumetric efficiency. The compactness of the molecular structure of the coating prevents the contact between air, water and other media and the pump impeller base material to minimize electrochemical corrosion and corrosion. In addition, the nature of polymer composite polymer, has chemical resistance, can improve the pump corrosion resistance, can greatly enhance the pump resistance to erosion and corrosion resistance.
 Pump in the process of working part of the energy loss, including mechanical wear and tear, loss of volume and hydraulic losses, mechanical loss refers to the pump sleeve seal friction, bearing friction, impeller surface and liquid friction. The use of Mika Ka Blu-Goo super lubricant to reduce pump seal seal friction, bearing friction, so as to improve the efficiency of the pump, saving energy purposes. It is a special inert material for a variety of uses, primarily to reduce intermetal contact. As a thread sealing compound, the product forms a contact surface between the male and female threads that protects the fitting from friction and wear while still supporting a pressure of 1407 kg / cm², even wear, corrosion or misalignment Machined threaded surface. This product is also an excellent gearbox additive that forms a thin film on the inner part. Thus reducing friction, gear noise and leakage. It also significantly reduces torque stress to meet the demand of dynamic decompression. It can be used as a gasket surface or as a filler supplement, sealed to prevent fluid leakage. Can be used at 316 ℃ temperature.