With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the cutting machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/ Rubber Products,Golf Mat Tee,Unbreakable Golf Tees,Golf Rubber Products Yantai UVT Sports Co.,Ltd. , https://www.uvtgolf.com
Laser cutting machine core components maintenance:
The laser includes five pieces of total anti-diaphragm, xenon lamp, YAG crystal, condenser cavity, and semi-reflective film. The laser is the core part of the laser cutting machine and must be strictly observed for its use and protection.
1. The surface of the diaphragm and the surface of the crystal must not be contaminated. Otherwise, clean immediately with alcohol, ether mixture or acetone. If the surface of the gold-plated condenser cavity is not clean, a fine polishing paste can be used to polish the surface. Lamps and crystals are wearing parts. Care should be taken when disassembling them.
2. The xenon lamp is a consumable product and its life is about 1 x 106 times. When the laser cutting machine laser output energy drops to 2/3 of the original energy index, the new lamp needs to be replaced. When changing the lamp, remove the electrode and electrode water-cooled parts and remove the lamp. The new lamp is clean and can be installed in the condenser.
3, YAG crystal coated with anti-reflection film at both ends, the price is expensive, do pay attention to protection, dirty and timely use long-fiber cotton and alcohol and ether mixture gently scrub, but must not be scratched end face.
4. The lamp emits light and irradiates the YAG crystal, and the light emitted by the lamp is irradiated with as much light as possible to the surface of the crystal with the condenser cavity, and the laser is output from the semi-transparent diaphragm side under the action of the resonant cavity of the front and rear diaphragms. Therefore, the surfaces of the components in the laser must be cleaned.
ã€China Cutter Trading Network is now giving back to the old and new members, special advertising space for free experience activities, a golden opportunity, first come first served. Log on to the official website for the latest information:/
Editor: zgqgjjyw