Large vertical wet mixing mill

Large vertical wet stirred mill is our own research and development, with independent intellectual property rights of ultrafine grinding equipment, now widely used in a number of domestic non-metallic mineral production enterprises, such as calcium carbonate, kaolin, quartz sand, coal-water slurry, barite and nonferrous metals and other fields. After long-term industrial application practice and strict on-site test, the production efficiency and stability have reached the advanced ranks, and the whole machine technology has reached the international advanced level.

Features

The processing capacity is large, the working efficiency is high, and the primary grinding particle size is -2μ90% or more.

The product has a narrow particle size distribution and adjustable size to meet the needs of different manufacturers.

Energy saving, more than 50% energy saving than traditional equipment, the barrel is not worn.

Stable operation, high grinding efficiency, low noise, no vibration; wet production without dust, very environmentally friendly.

Easy to install, easy to maintain and repair. With high wear-resistant materials, the service life of consumable parts is longer than that of similar equipment. The consumption of grinding media is lower than that of similar equipment, and the running cost is low.

The composite type of slurry structure can overflow the slurry, and can be leached out of the slurry to make the slurry smooth.

The blade type grinding disc has a small starting torque.

Heat Shrinkable Tube Cutting Machine

FMHZ-100/100D/160 Automatic Roll to Sheet Cutting Machine adopts upper and lower cutting tools, can cut width 1-150mm, the cutting length of this automatic cutter is 1-9999.9, accuracy up to 0.1mm.

This small cutting machine can cut for below materials: Heat Shrinkable Tube, Glass Fiber Tubes, Teflon Pipe, Yellow Wax, Velcro, Nickel Belt and so on.