The use of generator sets is becoming more and more extensive, and the installation sites are also varied. In the process of use, what are the requirements for the installation environment? If the diesel generator is installed indoors, the equipment room cannot be set too tightly, and the operation of the unit needs enough air circulation, which will affect the cooling effect of the diesel generator set , the air circulation is not smooth, and the heat generated by the generator is not easily dissipated. The window of the engine room can be installed without glass, and the security net can be used to meet the air needs of the unit. The window setting should not be too high and the distance from the ground can be appropriate. The environment around the equipment room should be kept dry and dust in the air should not be too much, which will affect the use of the unit.
Sack gabion is
cylindrical basket made of 8x10 double twisted steel woven wire mesh,
with mechanical characteristics higher than the ones suggested from EN
10223-3. It's filled with stones at the project site to form flexible
and permeable structures used for emergency and river training works
where local conditions require fast installation or where the water does
not allow for easy access to the site and where underwater installation
is necessary.
Sack Gabion Specification
Sack Gabion,Wire Mesh Sack Gabion,Coated Sack Gabion Box,Pvc Coating Sack Gabion ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.apkdlwiremesh.com
Prev:What knowledge to start the diesel generator set
Sack gabions are
supplied with steel reinforcing wires inserted during the manufacturing
process to facilitate closing during installation. The wire used for
the manufacture of gabion shall have a tensile strength between 3
80-550N/mm2 exceeding, in order to increase the tensile resistance of
the finished products, what is suggested from EN10223-3. Wire tolerances
are in accordance with EN 10218. Elongation shall not be less than 10%,
according to EN 10223-3. Test must be carried out on a sample at least
25 cm long. Meantime the adhesion of the zinc coating to the wire shall
be such that, when the wire is wrapped six turns around a mandrel having
four times the diameter of the wire, it does not flake or crack when
rubbing it with the bare fingers.
The use of generating units have a stress? Diesel generator | Diesel generator price / 2017-09-21
Next post:How to check the bolts and nuts of a diesel generator set