In the city of life, hook-and-tube garbage trucks are responsible for the transport of urban garbage trucks. In daily life, there are two common types. One is a compression garbage truck that collects garbage along the street, and the other is a hook-and-arm garbage truck. When the hook-and-tube garbage truck is used for loading and unloading garbage, the hydraulic system needs frequent operation. At the same time, the formation of carbon deposits will affect the efficiency of garbage trucks. This time, we will use the most common maintenance methods for hydraulic maintenance and reducing the carbon deposition method of the hook arm garbage truck. Correct maintenance method of hydraulic direction mechanism of hook-type garbage truck 1. The owner of the hook-up garbage truck should regularly check whether the hydraulic system joint has oil leakage. The hydraulic oil pipe should also avoid the friction of other parts to prevent it from damaging the intake air. 2. When the hook-arm garbage truck turns or turns around, don't kill the steering wheel. Leave it a bit to ensure that the hydraulic steering system is in normal working condition. 3, the owner of the hook arm garbage truck should regularly check the steering hydraulic oil, if less must be added in time, but also to clean the hydraulic oil cup and filter core, this can prevent the hydraulic oil dirty or deterioration. In general, we recommend replacing the hydraulic oil on a journey of 30,000 kilometers. Several methods for reducing carbon deposition in hook -and-eye garbage trucks 1. The hook-arm garbage truck should not be idling for a long time while driving, because the time it takes for a long idling drive to get over the normal temperature will be longer, and the evaporation rate of diesel oil after it is sprayed on the back of the valve is slow. Carbon deposition will also happen. 2. Hook arm garbage trucks should choose clean oil when refueling, which will also reduce the formation of carbon deposits. 3, the hook arm garbage truck should also pay attention to the timing when the flame is turned off, do not turn off the car once stopped, you can then idle a few minutes and then turn off. This will also reduce the formation of carbon deposits.
Apply tp mineral oil, Emulsified oil, Water-glycol, Phosphatide hydraulic oil medium. Used in pressure tube with fluid system,move out the solid particle and gelatinoid in the system.Quality control,Analysis, evaluation,inspection per GB, ISO and SAE Specification.
•Used in hydraulic system.
• Filter media is Complex Fiber.Resin-Impregnated Paper.Stainless
Steel Sintered Metal Mesh,control cleanliness effectively.
• First bubble point per ISO2942.
• Flow resistance per ISO3968.
• Retained capacity and Filter efficiency per ISO16889.
• Mass filtration precision for choose.
• The size can make to order according to the customer's demand
Hydraulic Filter,Hydraulic Medium Filter,Hydraulic Oil Filter,Hydraulic Fluid Filter XINXIANG PINGYUAN AVIATION HYDRAULIC EQUIPMENTS CO.,LTD , https://www.coupling.pl
