Model NO.: AX, BX, 3VX, 5VX, XPA
Static Conductive: ISO1813
Outerside Fabric: Polyester Cotton Canvas
Reinforcement: Polyester Hard Cord
Bottom Cover: Cr
Brand Name: Gpbelt / OEM
Trademark: GPBELT
Transport Package: Plastic Bag/ Carton
Specification: AX80, XPZ1550
Origin: China
HS Code: 4010390000
Model NO.: AX, BX, 3VX, 5VX, XPA
Static Conductive: ISO1813
Outerside Fabric: Polyester Cotton Canvas
Reinforcement: Polyester Hard Cord
Bottom Cover: Cr
Brand Name: Gpbelt / OEM
Trademark: GPBELT
Transport Package: Plastic Bag/ Carton
Specification: AX80, XPZ1550
Origin: China
HS Code: 4010390000
CLASSICAL RAW EDGE V BELT


Feature

. Greater transmission power than classical v belt

. Large friction coefficient, small friction loss

. Absorb transmission vibration, low noise, long service

. Fatigue endurance reaches one hundred million times.

. Temperature range from -50ºC to 120ºC

. Oil, heat, Ozone, abrasive resistance, anti-statistics
 
.Type Top width Pitch width Height Angel Length conversion Length
Range inch		 Length
Range mm
.ZX 10 8.5 6 40º Li=Ld-22 20"-100" 508-2540
.AX 13 11 8   Li=Ld-30 20"-200" 508-5080
.BX 17 14 11   Li=Ld-40 20"-200" 508-5080
.CX 22 19 14   Li=Ld-58 20"-200" 508-5080



Marking

.AX 1245Li 1275Ld:    AX49 means type AX (toothed), its inside length is 1245mm, its pitch length is 1275mm, and its inside length is 49inches.  


High Quality Raw Edge Cogged V Belt



WEDGE RAW EDGE V BELT

Features

.. Greater transmission power than classical v belt

. Large friction coefficient, small friction loss

. Absorb transmission vibration, low noise, long service

. Fatigue endurance reaches one hundred million times.

. Temperature range from -50ºC to 120ºC

. Oil, heat, Ozone, abrasive resistance, anti-statistics

Mark

Wedge raw edge v belts fall into two categories. The metric SP series comprise of XPZ, XPA, XPB, XPC. The inch series include 3vx, 5vx, 8vx models. V belts of these types are marked according to the outer length of the factory v belt. Specific noting shall be made on the order list of the customer, if the customer has special requirement. The length conversion table is available for conversion between various models.

High Quality Raw Edge Cogged V Belt


Example mark

XPZ 1283La 1270Ld 3vx500 means that its type is XPZ, outer length is 1283mm, pitch length is 1270mm, and it is corresponding to 3vx500.
 
Type Top width Pitch width Height Angel Length conversion Length
Range inch		 Length
Range mm
.3VX 9.5 / 8 40º La=Li+50 20"-200" 508-5080
.5VX 16 / 13.5   La=Li+82 30"-200" 762-5080
.XPZ 10 8.5 8   La=Li+50 20"-200" 508-5080
.XPA 13 11 10   La=Li+63 20"-200" 508-5080
.XPB 16.3 14 14   La=Li+82 30"-200" 762-5080
.XPC 22 19 18   La=Li+113 30"-200" 762-5080

High Quality Raw Edge Cogged V Belt

High Quality Raw Edge Cogged V Belt

FAQ

Q1.  Can I have a sample order?
        Yes, any sample order is welcome to know the quality of our products.

Q2.  What about the lead time of the sample or the final order?
        2-5 days for normal sample.
        20-30 days for a formal order.

Q3. How much is the minimum quantity for each item in one order?
       One mould quantity is ok. Usually around 50pcs for small item, 10pcs for big item. 

Q4. Is it possible to print our logo or brand on the belt?
       Yes, we can print your logo or design on the belt after receipt of your formal authorization                 .letter of the logo or your brand.

Q5. Do you offer the guarantee for your product?
       Yes, usually we offer one year warranty for all of our products.
  CLASSICAL RAW EDGE V BELT


Feature

. Greater transmission power than classical v belt

. Large friction coefficient, small friction loss

. Absorb transmission vibration, low noise, long service

. Fatigue endurance reaches one hundred million times.

. Temperature range from -50ºC to 120ºC

. Oil, heat, Ozone, abrasive resistance, anti-statistics
 
.Type Top width Pitch width Height Angel Length conversion Length
Range inch		 Length
Range mm
.ZX 10 8.5 6 40º Li=Ld-22 20"-100" 508-2540
.AX 13 11 8   Li=Ld-30 20"-200" 508-5080
.BX 17 14 11   Li=Ld-40 20"-200" 508-5080
.CX 22 19 14   Li=Ld-58 20"-200" 508-5080



Marking

.AX 1245Li 1275Ld:    AX49 means type AX (toothed), its inside length is 1245mm, its pitch length is 1275mm, and its inside length is 49inches.  


High Quality Raw Edge Cogged V Belt



WEDGE RAW EDGE V BELT

Features

.. Greater transmission power than classical v belt

. Large friction coefficient, small friction loss

. Absorb transmission vibration, low noise, long service

. Fatigue endurance reaches one hundred million times.

. Temperature range from -50ºC to 120ºC

. Oil, heat, Ozone, abrasive resistance, anti-statistics

Mark

Wedge raw edge v belts fall into two categories. The metric SP series comprise of XPZ, XPA, XPB, XPC. The inch series include 3vx, 5vx, 8vx models. V belts of these types are marked according to the outer length of the factory v belt. Specific noting shall be made on the order list of the customer, if the customer has special requirement. The length conversion table is available for conversion between various models.

High Quality Raw Edge Cogged V Belt


Example mark

XPZ 1283La 1270Ld 3vx500 means that its type is XPZ, outer length is 1283mm, pitch length is 1270mm, and it is corresponding to 3vx500.
 
Type Top width Pitch width Height Angel Length conversion Length
Range inch		 Length
Range mm
.3VX 9.5 / 8 40º La=Li+50 20"-200" 508-5080
.5VX 16 / 13.5   La=Li+82 30"-200" 762-5080
.XPZ 10 8.5 8   La=Li+50 20"-200" 508-5080
.XPA 13 11 10   La=Li+63 20"-200" 508-5080
.XPB 16.3 14 14   La=Li+82 30"-200" 762-5080
.XPC 22 19 18   La=Li+113 30"-200" 762-5080

High Quality Raw Edge Cogged V Belt

High Quality Raw Edge Cogged V Belt

FAQ

Q1.  Can I have a sample order?
        Yes, any sample order is welcome to know the quality of our products.

Q2.  What about the lead time of the sample or the final order?
        2-5 days for normal sample.
        20-30 days for a formal order.

Q3. How much is the minimum quantity for each item in one order?
       One mould quantity is ok. Usually around 50pcs for small item, 10pcs for big item. 

Q4. Is it possible to print our logo or brand on the belt?
       Yes, we can print your logo or design on the belt after receipt of your formal authorization                 .letter of the logo or your brand.

Q5. Do you offer the guarantee for your product?
       Yes, usually we offer one year warranty for all of our products.
 

Inflatable Arch Sprinkler

The inflatable arch sprinkler, children can pass through the curtains, play in the backyard, courtyard and lawn, bringing a lot of summer fun in the hot weather. The inflatable sprinkler is made of high -quality thick PVC materials, which is durable to prevent holes or puncture.

The Inflatable Sprinkler Items is easy to use. It needs to be inflated with a gas pump to the sprinkler (excluding), connect it to any garden hose, and then fill the base with water to help it stand stably. Dowry smoothly in the holes. By the way, if it is flipped or over, the water in the base must be full.

The inflatable sprinkler is not only suitable for summer outdoor sprayed toys for children, boys and girls, but also very suitable for children's swimming pools, beach lawn and children's birthday party. Any interesting parents can run with their children under the sprinkler, for a few hours, bringing a lot of fun in hot summer weather.

Inflatable Arch Sprinkler,Rainbow Sprinkler,Rainbow Sprinkler Arch,Arch Sprinkler

P&D Plastic Manufacture Co., Ltd , https://www.jmInflatableboat.com