Model NO.: FS2
Trademark: Anhusheng
Specification: CE APPROVED
Origin: China
HS Code: 8543709100
Model NO.: FS2
Trademark: Anhusheng
Specification: CE APPROVED
Origin: China
HS Code: 8543709100
         FS2 Gold Detector for Treasure Hunting

 Fs2 Gold Detector for Treasure Hunting

Introduction:

FS2 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector.

Fs2 Gold Detector for Treasure Hunting

The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2 is outfitted with the optional 11" DD search coil. While the FS2 makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2 exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets.

Fs2 Gold Detector for Treasure HuntingFs2 Gold Detector for Treasure Hunting
Device Specifications:
 
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2" and 3" order methods
Target 10 ground suppression: 3rd order
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Weight: 2 Ibs, 8 oz with battery installed
Batteries: Single 9 volt rectangular alkaline
Standard search coisl: 5"+11"


Product accessories details:

Fs2 Gold Detector for Treasure Hunting

Specification:
 

Mechanical:

S-rod with electronics housing on rod, 3-piece breakdown

construction

nonmetallic telescoping lower rod, adjustable position arm rest

Weight:

2 lbs, 8 oz with battery installed

Standard search coil:

 5 inch (12.3 cm) closed-frame round biaxial, not waterproof

Batteries:

Single 9 volt rectangular alkaline

Battery life:

15+ hours on good quality alkaline

Operating principle:

 VLF induction balance

Operating frequency:

19 kHz, crystal controlled

Reactive overload:

10,000 micro-cgs (with standard search coil)

Resistive overload:

1,200 micro-cgs (with standard search coil)

Ground balance range:

From ferrite to salt water inclusive

Discrimination ground suppression:

Combination of 2nd and 3rd

Target ID ground suppression:

3rd order

Operating temp range:

14 to 122 degrees F (-10 to +50 C)

Operating humidity range:

0 - 90% noncondensing

         FS2 Gold Detector for Treasure Hunting

 Fs2 Gold Detector for Treasure Hunting

Introduction:

FS2 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector.

Fs2 Gold Detector for Treasure Hunting

The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2 is outfitted with the optional 11" DD search coil. While the FS2 makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2 exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets.

Fs2 Gold Detector for Treasure HuntingFs2 Gold Detector for Treasure Hunting
Device Specifications:
 
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2" and 3" order methods
Target 10 ground suppression: 3rd order
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Weight: 2 Ibs, 8 oz with battery installed
Batteries: Single 9 volt rectangular alkaline
Standard search coisl: 5"+11"


Product accessories details:

Fs2 Gold Detector for Treasure Hunting

Specification:
 

Mechanical:

S-rod with electronics housing on rod, 3-piece breakdown

construction

nonmetallic telescoping lower rod, adjustable position arm rest

Weight:

2 lbs, 8 oz with battery installed

Standard search coil:

 5 inch (12.3 cm) closed-frame round biaxial, not waterproof

Batteries:

Single 9 volt rectangular alkaline

Battery life:

15+ hours on good quality alkaline

Operating principle:

 VLF induction balance

Operating frequency:

19 kHz, crystal controlled

Reactive overload:

10,000 micro-cgs (with standard search coil)

Resistive overload:

1,200 micro-cgs (with standard search coil)

Ground balance range:

From ferrite to salt water inclusive

Discrimination ground suppression:

Combination of 2nd and 3rd

Target ID ground suppression:

3rd order

Operating temp range:

14 to 122 degrees F (-10 to +50 C)

Operating humidity range:

0 - 90% noncondensing

Semi-Automatic Terminal Crimping Machine

Crimping Machine,Crimp Machine,Hose Crimping Machine

Ningbo luxibo co,.ltd , http://www.fjstrippingmachine.com