The clean bench is a kind of laboratory commonly used equipment, which is a function of local purification, that is, through the air purification technology, the space needed to operate reaches a sterile, dust-free state, thereby protecting the experimental subject during operation. Not contaminated.

The use of clean bench:

Before use, the clean bench should first open the UV lamp for half an hour to forty minutes to perform sterilization work in the work area, and need to check whether the various windows and doors on the side of the operation area are in working condition, and then turn off the UV lamp to turn on the fan and Fluorescent lights operate. ( Note: During the experiment, be sure to turn off the UV lamp, otherwise it will cause some damage to the experimenter. )

In the experiment, it is better to be in the middle of the operation area, in terms of design, so that it is safer and the clean environment can also extend its service life.

Clean bench maintenance:

The clean bench must be installed in a dry and clean laboratory, because the moist air on the one hand more conducive to the growth of bacteria, on the other hand, for the clean bench will rust, and affect the normal operation of the circuit.

In addition, Zhejiang Sujing also reminds you that, as a kind of more precise electrical equipment, clean benches are very important for daily maintenance and maintenance. They need regular cleaning, and the parts inside need regular replacement, so that Standards can be met in the laboratory so that experiments can be performed normally.

　　

Semi-automatic Saw Blade Pipe Cutting Machine

1. Gearbox:

The gearbox is made of casting, so it is very solid. At the same time, it is formed by the horizontal machining center for one-time processing and forming, that accumulated tolerance is small. The core component gear of the gearbox are imported from Taiwan, which is using advanced grinding and vacuum heat treatment technology, with high precision and long service life. In the use process, the noise of the machine head is small, the transmission efficiency is ensured, and the service life is long.

2. A self-lubricating bearing:

It is added at the movable joint between the head and the connecting seat, which can lubricate the connecting shaft in order to prevent the direct friction causing abrasion, so it helps to improve the working life, and accuracy that reduce the vibration of Saw Blade.

3. Regulating valve:

Regulating valve: the control valve imported from Taiwan is adopted, with high machining accuracy, stable flow control and even cutting speed. Fast return speed, improve work efficiency.

Semi Automatic Saw Blade Pipe Cutting Machine,Semiautomatic Pipe Cutting Machine,Semi Automatic Saw Cutting Pipes,Circular Saw Pipe Cutting Machine

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com