During the operation of the equipment, the on-site operation workers should perform the following inspections before the equipment is working. The following are common daily inspections of equipment: 1. Carry out routine inspection work on the cable of the equipment, whether there is cracking or damage. 2. Whether the components of the connected equipment are lost or damaged 3. Check for foreign objects between the equipment, and large particles cause certain damage to the equipment. 4. Check if the drum of the equipment can rotate freely. 5. Whether the hydraulic oil is in place, can you finish the daily lubrication work of the equipment? 6. The wiring phase of the equipment motor is correct to ensure normal operation. If there is any abnormality, it should be shut down immediately to correct the normal phase connection. Cnc Processing Parts,Gear Parts Processing,Metal Gear Parts Processing,Pinion Gear Parts Processing Dongguan Kingswin Wing Tat Metal Products Co., Ltd. , https://www.milling-turning.com
Proper use and maintenance of mineral processing equipment is the premise to give full play to the use of equipment. Improving the stability and reliability of equipment has extended the premise of equipment life. The operators of the equipment on the beneficiation equipment should strictly follow the regulations of the equipment. The equipment has been repaired and repaired according to the required start-up and shutdown.