Suitable for crushing various ores and rocks with medium and medium hardness. The cone crusher has the characteristics of large crushing ratio, high efficiency, high processing capacity, low operating cost, convenient adjustment and economical use. Users can choose different cavity types according to their own needs. The cone crusher of this cone crusher is sealed with grease to avoid the defects of water supply and drainage system and the defects of water pumping and mixing. Spring safety system is the overload protection device allows the foreign matter, iron blocks by crushing chamber without damage to the crusher. This machine is divided into standard type and short head type. Generally speaking, the standard type feed material has large particle size and the discharge size is relatively thick. The short head type crushing cone is steep and the feed size is small, which is conducive to the production of fine size. Material. Therefore, the standard type is generally used for coarse, medium and short heads for medium and fine crushing. The cone crusher realizes the insurance of the cone-type crusher spring insurance system when the non-breakable foreign matter passes through the crushing chamber or the machine is overloaded for some reason, and the discharge port of the cone crusher increases. The foreign matter is discharged from the crushing chamber of the cone crusher. If the foreign matter is stuck in the ore, the clearing system can be used, so that the ore discharge continues to increase, and the foreign matter is discharged from the crushing chamber of the cone crusher. Under the action of the spring, the cone crusher automatically resets the discharge port, and the cone crusher machine resumes normal operation. Crushing cavity surface covered with wear-resistant high manganese steel liner plate. The size of the discharge port is adjusted hydraulically or manually. Forehead gun mold,Forehead thermometer mold,needle tube mold,sample collection rack,Medical Detection Precision Mould, Precision Needle tube Mould Dongguan Hongke Plastic Precision Mould Co.,Limited , https://www.scientificmolds.com
Recently, in consultation with users cone crusher cone crusher is what shape, and today I gave you explain something about this problem. First of all, we need to understand what role the crushing cone plays in the cone crusher. The rotation of the motor passes through the pulley and the coupling, the cone crusher drive shaft and the conical crusher cone are circumnavigated under the eccentric sleeve. The fixed point is used for the swing motion. The broken wall of the crushing cone will be close to and sometimes leave the surface of the rolling wall fixed on the adjusting sleeve. At this time, the ore is continuously subjected to impact, extrusion and bending in the crushing chamber to realize the crushing of the ore. The motor drives the eccentric sleeve to rotate by the bevel gear, so that the crushing cone rotates. The crushing cone is sometimes close to and then leaves the fixed cone to complete the crushing and discharging. The support sleeve and the carrier body is connected by spring-loaded, when the crusher falls within the metal block, etc. When the object is not broken, i.e., deformed by compression springs, discharging the foreign matter, to achieve safety, to prevent damage to the machine. The broken cone is as follows: