HuiJie Steel Pipe
manufacturing High precision cylinder tubes and shaft,The steel tubing wide
application for
telescopic cylinders,Hydraulic cylinders,pneumatic cylinders and
shafts.The raw materials from seamless and
welded hot rolled tubes by cold drawn or cold rolled process and stress
relieved and annealed, The inner surface
roughness after honed and
skiving roller burnish.
The
honed steel tubes are produced according to the technical standard of
CDS EN10305-1/DIN2391 cold drawn precision steel
tubes
CDW EN10305-2/DIN2393/DIN2394 Cold drawn welded
precision steel tubes
DOM ASTM A513 welded drawn over mandrel steel
tubing
The normal
steel grade:E355 S355J2,CK45/AISI1045,CK35/AISI1035
The max
cylinders tubes,shaft tubes,roller bush can reach OD329mm,length 12000mm
Hydraulic Cylinder Tubes,Hydraulic Cylinder Pipes,Seamless Hydraulic Cylinder Pipes,Seamless Steel Hydraulic Cylinder Tubes Ningbo Huijie Steel Pipe Manufacturing Co.,Ltd , https://www.hjbearingtube.com
 Corrugated fasteners are made of 18- to 22-gauge sheet metal with alternate ridges and grooves. One end is cut square, and the other is sharpened, with beveled edges. These fasteners are made in different lengths and widths. The width varies from 5/8 inch to 1-1/8 inches, and the length ranges from 1/4 to 3/4 inch. Corrugated fasteners are used to fasten parallel boards together. Typical uses for corrugated fasteners are in mitered corners, butt joints, and end joints. Corrugated fasteners have greater holding strength than nails in small timber. They are driven with a hammer.Â
W Series Corrugated Fasteners
Fit tools of BeA W15,and most 25mm crown corrugated tools in the market.
Â
ITEM
LENGTH
PCS/BOX
BOXES/CTN
W6
1/4"
6.0mm
13824
72
W9
11/32"
8.8mm
9216
72
W12
1/2"
12.0mm
6910
72
W15
5/8"
14.4mm
5760
72
Â
Model NO.: Item: W9 Length: 11/32"
Transport Package: 24PCS/Stick 5760-13824PCS/CTN
Specification: CROWN: 24.8mm THICKNESS: 0.5mm
Origin: China
HS Code: 7317000000
We are the manufacturers of corrugated fastener/joint pins/wood joiners used in plywood flush doors, wooden frames, etc. These are available in different sizes 3/8", 1/2", 5/8",3/4" in bulk production. Very high quality hard and sharp to easily pierce into wood.