When buying a car, many people will consider what kind of car is more valuable, otherwise it will be very sad to buy the car immediately after the price drop. And everyone knows that some niche cars are doing poorly in terms of value preservation. Generally, there are not many people buying small cars, and it is more difficult to change parts and repairs. Although more personal, but after buying, when you sell used cars, there will be a very serious price cut. Let me tell you what to do to keep the car worthwhile. What the car can do to keep the car worthwhile . First, paint maintenance The appearance of a good car bought on the back side is very important, just like there are a lot of cars that are refurbished and can be sold. This is mainly because of the effort on the paint surface. Generally, people will do waxing and polishing, like polishing to do less, generally polishing for a long time will hurt the car paint, so that the car paint thin. There are also technologies that last a long time, such as lacquer plating, which lasts for five years, and makes the car look very bright, and it can also prevent acid rain. But the price is also very high, no matter what kind of paint maintenance we have to do one. Second, chassis armor Many people think that chassis armor should only be installed on the road in the countryside, but there is no way to control where you drive after you buy a car. Sometimes, when you borrow a car, what do you do, so install a chassis armor for the car. This will not cause damage to the chassis regardless of the environment. Generally, when it is rainy, it is most afraid of corroding the chassis of the car. It is not afraid of the chassis armor, and it can also play the role of a newspaper, but this is not necessary. Third, glass Many bodywork is good-looking, one-quarter or one-third of the field of vision is glass, so the maintenance on the glass can not be less, many people put the explosion-proof film on the car, and also let the people inside the car look outside. It is not damaged by the sun. In fact, many explosion-proof glass is not as safe as the explosion-proof membrane on the car. After the explosion-proof film is attached to the car, even if there is an accident, it will not be hurt because the car glass is broken, so this is very important in safety. What to do can keep the car worthwhile, and what the car can do to keep the car worthwhile is finished. In fact, if you want to keep the car at least, you can't let the car wading. After the car is in the water, it can be used normally after repairing the car. However, the price is 50% larger, so it is very important to put the car into the water. Pay attention to daily maintenance. Pay attention to the maintenance mentioned in the above small series, so when you sell used cars, it is not bad with the new car. How can you give you a low price?
Machine Pictures:
CL-80/100/80H-2000MM
CL-80/100/80H-1500MM
Featurers of Model CL-80/100/80H-1500mm
1.Strong Double Layer Vacuum Box Device
Strong Double Layer Vacuum Box Device helps absorb the hot air between film and cooling roller,which makes the film be more closed and tightly to the cooling roller thus enhance the cooling effect when the machine is running in high speed.
2. High Quality and Updated Advanced Cooling System
The cooling roller's diameter is 1000mm with bi-directional loop design and helix runner inside.The high-precision steel is adopted to ensure stable temperature on roller surface.
3.Melting Pump--Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.Installing the melt metering pump in the cast stretch film unit can make the machine produce constantly and efficiency. The pump can improve the product quality, stable the production process and decrease the energy consumption.
4.Four Air Shaft Roll Changers Device
One roll change takes only 30 seconds and this system can help produce small hand roll online when the machine is running in high speed.And so there is no need to install a Rewinding Machine to rewind,which helps save a lot of time, cost and labor.
Plastic melt metering pump is more and more important in extrusion process, especially in high-end products industries, such as high quality sheets, pipes, BOPP, optical cable.
Installing the melt metering pump in the cast stretch film unit, which can keep the production constantly and efficiency. The pump can improve the product quality, stable the production and decrease the energy consume.
The housing is made of chromium-nickel alloy or nickel-base alloy, titanium alloy. The gear is made of quenching chromium steel, other metal materials are also applicable. Bearing is made of graphite NIAG, zirconium oxide or quench tool steel.
Advantages:
FAST AND STABLE FLOW SUPPLY
Eliminated the extruder`s pulsation wave. Improve the product quality, decrease the defective rate, and decrease the waste, which can save 2% material and 25% of the unit power consumption.
STABLE AND EFFICIENCY PRESSURE CONTROL
The melt pump can provide a stable pressure, which short the discharge time obviously and make the production effectively.
INCREASE THE EXTRUDER OUTPUT AND THE MACHINE LIFE
It has been found that after install the melt pump, the max pressure wave value is the pressure after pump. Which can make the inner pressure of the extruder decrease, the melt shear strength decrease, the temperature curve gently, and restrain the temperature rising. Also the melt pump can avoid the damage to the extruder from the high pressure.
Main Technical Specification of CL-80/100/80H-1500mm
(Such as plastic film machinery.)
(1) Overall Dimensions(L*W*H): 14m*6.5*4.45
Max width of rewinding: 500mm*3
Max Rewind Diameter: ø400mm
Liner speed of machinery: 350m/min
(2)Rewind the film by combining it`s surface and core to make the film roller tightly closed and level and smooth.
(3)Remove the film roller and install the paper tube at the same time, which only takes about 25-30s and produce 2-3kg small film roller when the machine is running in high speed.
(4)Automatic edge material recycling system with on-line vacuum makes the process of rewinding more smooth, increases the fracture resistance, and decreases the limitation by liner speed.
(5)The recycling materials are extruded out from only and specific screw to stable the the extrusion system and to decrease the deviation about the weight of film.
(6) The extrusion machine is driven by coupling which stables the extrusion process and therefore stables the film output from die head.
(7)Prompt measurement to adjust the thickness and uniformity of the film easily.
High Speed Stretch Film Machine High Speed Stretch Film Machine,Automatic High Speed Stretch Film Machinery,High Speed Stretch Film Unit CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , https://www.clxmachinery.com
