Model NO.: ACE-65/132-80/156-92/188
Motor Brand: Siemens,Weg,Sew
Gearbox: Vertical Type Sew/ Falk Brand
Inverter: ABB/Schneider/Siemens
Bearing: SKF,NSK
Barrel & Screw Material: Bimetallic Barrel & Screw
Output Capacity: 700kg/H
Raw Material: UPVC/CPVC/PVC Powder
Trademark: ACEEXTECH
Transport Package: Wooden Pallets
Specification: PVC pipe extrusion machine cost
Origin: China
HS Code: 8477209000
Model NO.: ACE-65/132-80/156-92/188
Motor Brand: Siemens,Weg,Sew
Gearbox: Vertical Type Sew/ Falk Brand
Inverter: ABB/Schneider/Siemens
Bearing: SKF,NSK
Barrel & Screw Material: Bimetallic Barrel & Screw
Output Capacity: 700kg/H
Raw Material: UPVC/CPVC/PVC Powder
Trademark: ACEEXTECH
Transport Package: Wooden Pallets
Specification: PVC pipe extrusion machine cost
Origin: China
HS Code: 8477209000
Water supply PVC pipe machine of plasitc

Application:
PVC Plastic pipe making machine is mainly used in the production of Agricultural water supply & water discharge system, architectural water supply & discharge system, wire laying system, etc. purposes. 
The unit consists of Conical (Parallel) double screw extruder-PVC pipe mold-Vacuum forming tank-Haul-off machine-Cutting machine-Stacker/Belling machine. 
Producing pipe diameter range: Φ16mm-Φ630mm.
And the line can be equipped with Comptroller thickening instrument or computer ink-jet printer, etc. to achieve the production and manufacture of high-grade tubing.
Water Supply PVC Pipe Machine of Plasitc


Advantages:
1. Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can guarantee perfect solution;
2. Spider type die head can reduce joint line of the melt material, with reasonable compression ratio design;
3. Vertical integrated structured gear box with adopts NSK/SKF bearings guarantee stable operation and long uselife;
4. Vacuum calibration tank adopts high-efficiency two chamber and large length design, providing faster calibration and more efficient cooling;
5. Planetary cutter adopts hydraulic feeding of blade which providing perfect chamfering processing and cutting surface;
6. U type, R type and Air blow type socket can be provided according to applications;
7. Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently.
Water Supply PVC Pipe Machine of Plasitc
Water Supply PVC Pipe Machine of Plasitc
Water Supply PVC Pipe Machine of Plasitc
Water Supply PVC Pipe Machine of Plasitc
Water Supply PVC Pipe Machine of Plasitc






Work flow and detailed information :
Feeder - To feed material into extruder;
Extruder - World famous brand electrical component such as Siemens,Schneider, ABB etc;
- High torque gearbox with adopts NSK/SKF bearing;
- Siemens/WEG original motor achieved global after service;
- Bimetallic screw and barrel;
- Intelligent PLC controlling system with human-friendly interface. 
Die head - High melt homogenity
- Low pressure built up even with high outputs
- Melt channel distribution system
- Equipped with seramic heaters
- Pipe head carriage for easy movement
- Easy maintenance thanks to the optimized and proven designed construction.
Vacuum calibration tank - 304 stainless steel with painted outer surface
- Special water sprays are located on the best position for cooling the pipe efficiently
- Special and easy adjusted pipe supports for each pipe diameter
- Installed vacuum and water pumps can work without any maintenance for long times
- Special cooling baths can be designed for specific extrusion production
Haul off - Upper and lower caterpillar is driven separately by the frequency inverter
- Fast change type pads
Planetary cutter - Automatic synchronisation with extrusion speed
- Planetary equipped with disk and milling cutter for cut and chamfering
- Touch screen control panel
- User friendly software developed by Aceextech
- All movements are motorised and controlled by control panel
- Pipe blocking vices device
- Type of the cutting unit is chose depend on pipe.
- Less maintenance needs.
- Completely closed and secured machine for maximum safety.
Belling machine - Socket forming: smooth (solvent cemented)
- Socket forming: shaped for insertion of rubber gasket (blowing system)
- Socket forming: collapsible system
- Socket forming: auto-load rubber gasket
- Touch screen control panel
- User friendly software developed
- Automatic synchronisation with extrusion speed
- Pneumatic, hydraulic and motorized movements.
- High quality belling tools.
Stacker - Stainless steel 304 as touching material
- Discharge driving by air cylinder


Technical Parameter:
Diameter ranges(mm) Extruder model Max. Capacity(kg/h) Max. lineal speed(m/min) Extruder motor power(kw)
16-32 (4-cavities) ACE65/132 300 10*4 37
20-63 (Dual) ACE65/132 300 15*2 37
50-160 ACE65/132 300 8 37
75-250 ACE80/156 500 6 55
110-315 ACE80/156 500 4 55
75-160 (Dual) ACE92/188 850 6 110
315-630 ACE92/188 850 1.2 110
 
Technical Parameter of Main extruder:
Model Power
(kw)		 Screw Diameter (mm) Screw Qty. Designed Output (kg/h) Dimension(L*W*H)
(mm)
ACE-45/90 15 Φ45/90 2 70 3360x1290x2127
ACE-51/105 18.5 Φ51/105 2 100 3360x1290x2127
ACE-55/110 22 Φ55/110 2 150 3620x1050x2157
ACE-65/132 37 Φ65/132 2 300 3715x1520x2450
ACE-80/156 55 Φ80/156 2 400 4750x1550x2460
ACE-92/188 110 Φ92/188 2 750 6725x1550x2814
 
 Main components: 
- Motor: Siemens, WEG, SEW
- Gear reducer: SEW, FALK
- Bearing: SKF, FAG, NSK
- Air cylinder: Festo, SMC, AirTac
- PLC interface and module: Siemens, Schneider, Beckhoff
- Frequency inverter: ABB, Schneider, Siemens
- Servo motor: Lenze, Delta
- Pressure sensor: Dynisco, Gefran
- Low voltage component: Siemens, Schneider, Omron, LS
- Temperature controller: Omron, RKC
- Solid state relay: Crydom, Celduc

About ACEEXTECH:
ACEEXTECH is a creative company, focusing on R & D of plastic extrusion system, and providing the equipments and solutions for plastic pipe, profile, tile, sheet and board.
ACEEXTECH products fulfill the needs of users in a very direct way due to over 25 years of knowledge and experience in plastic extrusion field, which also helps us to contribute actively to the success of customers by offering sustainable solutions that meet industry needs.    
ACEEXTECH offers a complete portfolio of support and consulting services all the time, from project engineering to custom financing solutions, after sales service at its best, ongoing production optimization, training and advisory services, even end product development.
 
Why ACEEXTECH:
- Specialized R & D team involved in plastic extrusion industries over 25years.
- Ability to provide the customize

PP Composite Cap For Plastic Infusion Container

The polypropylene composite cap for plastic infusion container comprises of the pull‐tab outer cap, inner cap, and synthetic medical‐level polyisoprene cushion; among which, the materials for the inner cap and outer cap are the imported medical‐level polypropylene, complying with the FDA rules and passing the USP CLASS VI test; the synthetic medical‐level polyisoprene cushion can be made from the imported product on the request of user. The inner cap of the composite cap will contact with liquid medicine directly to ensure the quality; whereas the cushion will be helpful to prevent penetration and seal whilst infusing the liquid medicine, and the outer cap plays a role to prevent bacterium.

The composite cap is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, assembly and inner packing and so on, are designed and processed as per the

cleanliness requirements at the partial level of Class 100, which passes the GMP on‐site certification and complies with the cleanliness

requirements of high capacity injection medicine.

The facilities involved by production, test and inspection of composite cap are available, with strict control and management to be conducted in the whole process of production, free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such facilities may ensure the product quality.

The polypropylene composite cap for plastic infusion container is mainly used for non‐PVC soft‐bag infusion and polypropylene plastic bottle infusion.

Pp Cap,Plastic Cap For Infusion Container,Pp Cap For Plastic Infusion Container,Caps For Infusion Containers

YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com