PET Series Injection Moulding Machine
1, Efficent plasticizing screws with large length to diameter ratio( designed by Germany).
2, The central clamping structure honor invention patent of China.
3, Enlarge plasticizing motor.
4, Enlarge ejector force.
5, Multiple options of core- pulling modes.
6, Independent r& d for super- energy servo system with high effiiciency.
*pet injection molding machine price:reasonable.
Pet Inject Mold Machine, Injection Moulding Machine, Small Plastic Injection Machine, Pet Special Injection Moulding Machine,Pet Injection Molding Machine Price BOLE INTELLIGENT MACHINERY CO., LTD , https://www.bolemachinery.com
Second, the pulse electronic fence wall top type installation wall type electronic fence, directly installed on the top of the wall above. The wall height should be above 1.8m. The installation of poles can be welded, clamped or embedded in three ways, depending on the condition of the wall structure and choose a more appropriate way. For example, the welding method may be used on a fence. On concrete walls, pre-embedded methods can be used, and clamps can be used on brick walls. As long as it is stable and beautiful, you can also use other methods.
Third, the pulse electronic fence independent installation will be installed in the electronic fence around the building. Since its height is not less than 1800mm, and the number of wires is 8-20, the tension between the wire and the terminal pull rod and the bearing rod is relatively large. Therefore, the terminal pull rod and the bearing rod must have sufficient strength, and the terminal pull rod must have sufficient strength. The bearing rod must be laid firmly. If the soil is solid, the terminal pull wire and the lower end of the bearing rod can be directly buried in the ground for 60 cm. If the terminal bar is not rigid enough, support should be added. The middle bearing rod, although not subject to the tension of the wire, must support multi-line pressure, and therefore, it needs to be installed securely. Can be buried installation. As shown in Figure 12 line independent installation
I. Impulse Electronic Fence Auxiliary Installation Auxiliary electronic fence is attached to the upper or inner side of the fence or fence. The fence directly bears the pressure and wire tension of the electronic fence. Therefore, the structural strength of the wall must be ensured before installation. If it is not firm, it should be reinforced beforehand. The distance between the top metal conductor line at the front end of the electronic fence and the top of the wall or the fence shall be less than 700mm.